My WPA-7617 doesn't have the wifi's light on
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello, I try to connect my wpa 7617 to my pa 7017 but my 7617 doesn't have the wifi light on and all the others lights works wath did I have to do?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Ensure that the Wi-Fi lights are on, indicating that the Wi-Fi function is enabled. If not, press and hold the Wi-Fi button for at least 5 seconds to turn on the wireless function.
- Copy Link
- Report Inappropriate Content
@Sunshine but i have the light on right now but there's no Wi-Fi on the cpl
- Copy Link
- Report Inappropriate Content
If you're still facing the issue of the TP-Link Powerline Extender's Wi-Fi network not being visible on client devices, please follow the troubleshooting steps below:
1. Ensure that the Wi-Fi lights are on
2. Verify if you have copied the same Wi-Fi settings from your router. If you have, it's normal for the powerline extender to share the same Wi-Fi name and password, resulting in no separate Wi-Fi networks.
3. Make sure that you haven't enabled Wi-Fi scheduling or that it is not currently in a scheduled "off" time period.
4. Attempt to change the Wi-Fi settings, including the Wi-Fi name and Wi-Fi channel, using a wired connection.
5. Try performing a factory reset on the powerline extender. Press and hold the Reset button for at least 5 seconds. When the Reset is triggered correctly, all LEDs will turn off and then start again.
- Copy Link
- Report Inappropriate Content
@Sunshine but now the Wi-Fi button doesn't work anymore😔
- Copy Link
- Report Inappropriate Content
Do you mean WiFi LED is off now and pressing WiFi button cannot turn it on?
If it is still the same after the factory reset, you could contact the retailer or local support team in your area to check the warranty.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 571
Replies: 5
Voters 0
No one has voted for it yet.