Doesn't work, driver's can't install
Doesn't work, driver's can't install
Hello, I bought a new Archer TXE75E (UN) ver 2.0, I connected it to a computer with a motherboard: Alder Lake Z690 from HP, model 8918. I did everything as in the instructions, but in the device manager it is displayed in completely different places than in guides. Moving on, I downloaded the drivers from the TP-Link website. bluetooth won't install because I have newer drivers, and wifi is updating, but nothing else. He didn't see the device and the drivers didn't seem to work. Deleting and reinstalling did nothing. What can I do with this?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Could you maybe post a screenshot of the Device Manager that shows the Wi-Fi card in different places than in the guides?
Once a driver is installed it should show up under "Network adapters" as "Intel(R) Wi-Fi 6E AX210 160MHz".
- Copy Link
- Report Inappropriate Content
It's showing under "another device's" named something around PCIE slot. I can send picture after 5pm. Also when i trying to update this driver, always shows blue screen ^^
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Ok.
It is normal for a Wi-Fi card to show up under "Other devices" as "Network controller" as long as there is no suitable driver installed.
However, it is unclear why the driver for the TXE75E doesn't install.
A driver installer will look if there is any hardware that matches one of the hardware IDs listed within the driver.
So, we should check what the hardware ID of that "Network controller" under "Other devices" is. To do that right-click on the "Network controller", choose "Properties", then the "Details" tab and then select "Hardware Ids" from the dropdown selection. Please post the Hardware ID here.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I check also this usb where I connect adapter. Previously there were LED lights plugged into it Since it is plugged in, this yellow triangle is constantly displayed in the device manager.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Let's care about the Wi-Fi driver first.
The hardware IDs of your card look fine. There should be no reason for the driver to refuse installation.
Try to install the driver manually by downloading it from here
https://www.intel.com/content/www/us/en/download/18231/intel-proset-wireless-software-and-wi-fi-drivers-for-it-administrators.html
unzip it to a folder on your hard disk
and then right-click on the "Network controller", select "Update driver" and browse to the folder into which you unzipped the driver files. Then click "Next" and check what happens.
- Copy Link
- Report Inappropriate Content
@woozle
Ok, so I did it and now I can choose which Wi-Fi to connect to. I have a choice between Wi-Fi and Wi-Fi 3. When I turn on the new Wi-Fi 3, the download speed was for a 5 minut 1100 and now back to again 600... so it's looks like works exactly this same like orginal. How can I be sure it works?
Bluetooth also not working.
That's how is looks like now Device Manager. Network controller disappeared
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1362
Replies: 13
Voters 0
No one has voted for it yet.