Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
23 Reply
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 11:06:18

  @Sunshine 

 

I have issues on the BE800 itself. Even when I plug my laptop via ethernet directly to the back of the BE800. Keeps dropping internet. Works for a few minutes and then dies.

  0  
  0  
#12
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 12:29:51 - last edited 2024-04-01 12:48:21

  @terziyski 

 

I did a factory reset, updated firmware and started all over again.

 

Here is the negotiated speed:

 

 

 

Here is the speedtest via ethernet to the BE800:

 

 

 

  0  
  0  
#13
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 12:46:56

  @dis69 

 

I thought that you were on the latest FW release already. Which FW version you're using now.

I can't see the negotiated speed screenshot - is everything OK there ?

Do you have any internet drops now ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#14
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 12:51:37 - last edited 2024-04-01 13:13:46

  @terziyski 

 

Firmware:

 

 

But still havoc if I unplug ethernet and use the Deco Mesh. Something is not right.

 

Tried multiple things but each time I go back to the AX75.

 

Dropped while typing this msg (laptop connected via ethernet to the BE800 so not even wifi) and now switched to my mobile wifi to finish the post. Something not stable with the BE800.

 

  0  
  0  
#15
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 13:36:29

  @dis69 

 

Here you can find the BE800 ethernet ports negotiated speed:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#16
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 23:01:18

  @terziyski 

 

Here is the negotiated speed:

 

 

EasyMesh is OFF.

 

Problem is not only on Deco. Internet drops when I connect via ethernet to the BE800 and also when I connect directly to the BE800's wifi.

 

All settings otherwise identical to the AX75 as far as I can see.

 

Problem with hardware or firmware?

 

  0  
  0  
#17
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 23:18:40 - last edited 2024-04-02 23:56:52

  @dis69 

 

It's hard to say at this moment because the root cause was not identified yet, but I would bet on FW.

10G ports seem fine - what hardware do you have connected at BE800 LAN ports 1 and 4 ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#18
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-02 05:26:54

  @terziyski 

 

Lan 1 is connected to my TP Link switch that is connected to my Samsung TV and a Deco M9 and a Hue Hub

Lan 4 is connected to my macbook

  0  
  0  
#19
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-02 16:31:43 - last edited 2024-04-03 04:55:17

  @dis69 

 

Nothing abnormal in the connections. Probably @Sunshine will come up with a way to troubleshoot your issue.

I just noticed that there's a new FW release for US region marked as version 1.1.1 Build 20240227 rel.33191(5553).

It's quite possible that a new FW release will follow for SG FW region as well.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#20
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-03 03:53:25 - last edited 2024-04-03 03:53:49

  @dis69 

 

Hi, let me confirm the following information before escalating your case to our senior engineer:

1. When using BE800 only(all Deco units disconnected), speed is normal, but internet drops every a few minutes, will it recover automatically or you have to restart the BE800? do you see exclamation mark on the LED screen when internet drops?

2. When using BE800 with Deco network, internet still drops on BE800, which causes Deco network losing internet frequently, BE800 wired and wireless speed is normal 900+Mbps but Deco network speed is only 500Mbps and sometimes 10Mbps, am I right?

 

For the BE800 internet dropping issue, if possible, please check if there is still WAN IP address or not when the issue happens, if so, try to configure Internet DNS servers manually to 8.8.8.8 and 8.8.4.4 on Advanced > Network > Internet > Advanced Settings to see if it helps.

 

By the way, who is your ISP please? please share with us a complete network topology as well.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#21
Options
Related Articles