Home Network Community > Deco > Running 6ghz off satellite deco only
< Deco

Running 6ghz off satellite deco only

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Running 6ghz off satellite deco only

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Running 6ghz off satellite deco only
Running 6ghz off satellite deco only
2024-03-30 23:42:35 - last edited 3 weeks ago
Model: Deco XE75 Pro  
Hardware Version:
Firmware Version:

I currently have a Deco mesh that consists of three X68 units (one is the main) that the 2 satellite units connect via wifi, and also two X20 units as satellites that connect via ethernet back to the main unit. I am wanting to switch out one of the X20 units for an XE75 pro and use that unit to broadcast on WiFi-6E a 6ghz signal only for use by a VR headset in the same room as I do not want any other traffic etc interfering as it currently does with 5ghz. 

 

My question is, will I be able to activate the 6ghz from the satellite XE75 unit or will it only activate 6ghz if it is set as the main unit?

 

Thank you.

  0      
 
  0      
 
#1
Options
5 Reply
Re:Running 6ghz off satellite deco only
2024-04-01 02:41:24 - last edited 3 weeks ago

  @Toto15423 

Update:

Deco XE75 needs to work as the main Deco to use the 6GHz WiFi band.

Thank you very much and Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Running 6ghz off satellite deco only
2024-04-01 03:41:13

  @David-TP thank you.

  1  
  1  
#3
Options
Re:Running 6ghz off satellite deco only
2024-04-11 11:39:40

  @David-TP I have just received my XE75-Pro (I updated to latest firmware) and set it up as a satellite unit, when ever I try to activate the 6ghz  channel it automatically reverts back to backhaul only. No matter what I do this continues to happen. The only way I have found is to have the XE75-Pro set as the main unit which unfortunately does not work for me as that then puts the unit to far from where I need it to be. 

 

Seems I will either have to buy another and then use 1 as a main unit and the 2nd unit where I need it or return it as it does not do what I need it to do which is broadcast a 6ghz signal whilst being a satellite unit.

 

If you have any suggestions on why this is happening and how to fix it, it would be greatly appreciated.

  1  
  1  
#4
Options
Re:Running 6ghz off satellite deco only
2024-04-12 03:41:16

  @Toto15423 

Hi, Nice to see you again.

Could you please refer to this link to submit the APP log for me:

How to submit Deco APP log

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Running 6ghz off satellite deco only
2024-04-12 05:41:27

  @David-TP thank you, I will set it up again this weekend and forward the logs. 

  1  
  1  
#6
Options

Information

Helpful: 0

Views: 516

Replies: 5

Related Articles
6Ghz advice please
140 0
Network of 2x Deco XE75 Pro; Ethernet Backhaul Running at 100mbps
142 0
 6ghz issue deco xe75 pro
55 1
 Wifi 6ghz
891 1
6GHz network SSID not visible so cannot connect
6000 3
 Satellite Decos don´t connect to main deco
386 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.