Home Network Community > Deco > Deco XE75 V1 Firmware Update 1.3.2
< Deco

Deco XE75 V1 Firmware Update 1.3.2

Deco XE75 V1 Firmware Update 1.3.2

Deco XE75 V1 Firmware Update 1.3.2
Deco XE75 V1 Firmware Update 1.3.2
2024-03-20 14:40:41 - last edited 2024-03-22 07:36:05
Tags: #Firmware Update
Model: Deco XE75  
Hardware Version: V1
Firmware Version: 1.3.2

I've just received a notification in the Deco app that there's a new firmware version available for my Deco but it's not listed on the website yet, and the notes for the update are exactly the same as the previous firmware:

 

Can someone at TP-Link please look into this before I potentially brick my Decos?

XE75 V1.0 3-pack / Wired backhaul / Router mode / UK
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Deco XE75 V1 Firmware Update 1.3.2-Solution
2024-03-22 01:46:48 - last edited 2024-03-22 07:36:05

  @Wrayman 

Hi, Thank you very much for the feedback.

The 1.3.2 is the correct firmware for Deco XE75 V1 and this version has mainly updated the HomeShield Features.

I have reported to the web support and they could help us update the release note of 1.3.2.

Sorry for the inconvenience and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
Recommended Solution
  2  
  2  
#6
Options
10 Reply
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-03-20 15:38:23 - last edited 2024-03-20 15:40:33

  @Wrayman It now looks like it is available?


https://www.tp-link.com/us/support/download/deco-xe75/v1/#Firmware

  0  
  0  
#2
Options
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-03-20 15:49:36

  @Fl1nst0ne the fact that the update notes are identical implies that they are either wrong or the last update didn't address the issues! I think I'm going to hold off until I get confirmation that the update is correct and not break my (rather expensive) equipment! Hopefully it's just incorrect notes and the website gets updated shortly.

XE75 V1.0 3-pack / Wired backhaul / Router mode / UK
  0  
  0  
#3
Options
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-03-21 04:24:55

@Wrayman They're not "identical", on 1.3.2 there are "two" new features/enhancements; on 1.2.9 there's one

Just a M4 (2-pack) user who regrets buying it
  0  
  0  
#4
Options
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-03-21 06:50:05

  @Fl1nst0ne I'm in the UK and it's not available on my support page yet. Another reason to avoid doing it for now I suppose! 

XE75 V1.0 3-pack / Wired backhaul / Router mode / UK
  0  
  0  
#5
Options
Re:Deco XE75 V1 Firmware Update 1.3.2-Solution
2024-03-22 01:46:48 - last edited 2024-03-22 07:36:05

  @Wrayman 

Hi, Thank you very much for the feedback.

The 1.3.2 is the correct firmware for Deco XE75 V1 and this version has mainly updated the HomeShield Features.

I have reported to the web support and they could help us update the release note of 1.3.2.

Sorry for the inconvenience and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
Recommended Solution
  2  
  2  
#6
Options
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-03-22 08:17:42

  @David-TP thanks David, good to know! I just didn't want to upload firmware that might have been for another hardware version and potentially do some harm to my network yes

XE75 V1.0 3-pack / Wired backhaul / Router mode / UK
  0  
  0  
#7
Options
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-03-26 18:49:36
I did the update and since then, I have problems with 2,4G network clients droping connection. Can I revert to 1.2.9 version?
  3  
  3  
#8
Options
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-03-27 08:37:53

  @StaneB if you want to revert to a previous version you'll need to open a browser on a PC and navigate to http://192.168.68.1/ then sign into the Deco and go to:

 

Advanced > System > Firmware Upgrade

 

Then you need to go to the Deco support site and download the firmware for your particular region and hardware version, then you can upload and install it with the firmware upgrade tool.

 

I'd recommend a wired connection to avoid disconnection during upload but I've never downgraded the firmware of my Decos so maybe check the forums for other users' advice yes

XE75 V1.0 3-pack / Wired backhaul / Router mode / UK
  0  
  0  
#9
Options
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-03-27 13:39:07

  @Wrayman 

 

Hello,

 

Thank you for your reply.

I would just like to know if anyone downgraded from 1.3.2 and if it's safe, because it is not within the same 1.3 version to downgrade to 1.2.9.

I have V1 hardware.

 

Br

  0  
  0  
#10
Options
Re:Deco XE75 V1 Firmware Update 1.3.2
2024-06-10 21:14:49

  @Wrayman 

 

Since the firmware update my arlo essential doorbell could not connect any longer, I've tried reinstalling the doorbell many, many times.

I've looked in the timeline of my doorbell and exactly on the date of the firmware update, the wifi doorbell (2,4ghz)  is not connected any longer..

 

any suggestions how to fix this?

 

regards,

 

Bart

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1813

Replies: 10

Tags

Firmware Update
Related Articles
Deco XE75 downgrade from 1.3.2
739 2
Deco XE75 serious lag after firmware update to v1.2.6
2804 2
XE75 Pro Cannot update firmware
528 3
 Deco XE75 V1 vs V2 firmware
204 1
 Anyone successfully upgraded their XE75 to 1.3.2 yet?
420 0
 Update latest firmware for XE75
2276 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.