USB 4G for TL-WR902AC problem is back

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

USB 4G for TL-WR902AC problem is back

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
USB 4G for TL-WR902AC problem is back
USB 4G for TL-WR902AC problem is back
2024-03-11 23:20:06 - last edited 2024-04-02 09:22:09
Model: TL-WR902AC  
Hardware Version: V3
Firmware Version: 0.9.1 0.4 v0089.0 Build 230223 Rel.5237n(4555)

Hi to everyone,

 

I have a problem connecting my TL-WR902AC v3 to USB 4G. The router recognizes my Huawei E3372h-320 LTE USB key but it always stops working within 24 hours with this error message:

 

1    2024-03-11 19:50:56    3G    Error    724: handle_card failed.
2    2024-03-11 19:50:55    3G    Error    690: after_switch not succeed error.
3    2024-03-11 19:50:24    3G    Error    724: handle_card failed.
4    2024-03-11 19:50:24    3G    Error    207: get card info error, before usb_modeswitch.

 

 

This solution is fixed older versions but not actually firmware.

https://community.tp-link.com/en/home/forum/topic/245560

 

Thank you very much in advance for your help

 

Best regards.Lucas

  0      
  0      
#1
Options
1 Reply
Re:USB 4G for TL-WR902AC problem is back
2024-03-12 09:13:26

  @trusterrr 

 

Hi, the issue in your case seems different since the USB modem can be detected and working for some time before it stops.

May I know if the internet will recover automatically after a while? or you have to restart the router or unplug and replug the USB modem?

 

Please connect the same USB modem to your computer directly and monitor if there is any similar issue.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options