Home Network Community > Wi-Fi Routers > Archer AX20 V3 - binding to the tp-link cloud - HOW?
< Wi-Fi Routers

Archer AX20 V3 - binding to the tp-link cloud - HOW?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX20 V3 - binding to the tp-link cloud - HOW?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX20 V3 - binding to the tp-link cloud - HOW?
Archer AX20 V3 - binding to the tp-link cloud - HOW?
2024-03-06 08:00:10 - last edited 2024-03-06 12:38:33

Hi

I successfully installed my AX20.  During the installation I did not see anywhere to enter my tp-link cloud ID and password like I did with my AX12, EAP, RE500x, VX1800v.

Neither in the Tether app or in the router's web page do I see anywhere to add this info after setup.

Does anyone know how to do it?

(there is so much inconsistency between the TP-link product interfaces, there is a serious need for some unification across devices)

thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer AX20 V3 - binding to the tp-link cloud - HOW?-Solution
2024-03-06 12:37:18 - last edited 2024-03-06 12:38:33

  @Dunk-c 

Temporarily changing back to Router mode, entering the cloud info, switching back to AP mode resolved the problem.  What a rigmarole!  I guess the engineers must have a reason for making this so difficult.

I think my other routers started up by default in Router mode and then I changed them to AP mode and didn't experience this problem.

thanks 🙏

Recommended Solution
  0  
  0  
#7
Options
7 Reply
Re:Archer AX20 V3 - binding to the tp-link cloud - HOW?
2024-03-06 10:56:35 - last edited 2024-03-06 10:56:50

  @Dunk-c 

 

Login through the web management interface this menu should be here:

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Archer AX20 V3 - binding to the tp-link cloud - HOW?
2024-03-06 11:37:19 - last edited 2024-03-06 11:49:33

  @terziyski 

thanks but I see different options in my Safari browser in Australia.  Maybe there are different interfaces depending on location? There is nothing under SYSTEM either

 

  0  
  0  
#3
Options
Re:Archer AX20 V3 - binding to the tp-link cloud - HOW?
2024-03-06 12:01:10

  @Dunk-c 

 

Missing Advanced menu is usually a sign that you're using the router in AP mode. Is that the case ?

If that's the case you should know that some features are not available when the device is in AP mode - details.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  2  
  2  
#4
Options
Re:Archer AX20 V3 - binding to the tp-link cloud - HOW?
2024-03-06 12:07:32 - last edited 2024-03-06 12:12:15

  @terziyski 

yes in AP mode but so are the other three routers in the house and they are all cloud devices.  Could the AX20 really be designed to be different?

Might it be possible to temporarily change the mode, activate the cloud binding, and change back to AP and retain the cloud access?

  0  
  0  
#5
Options
Re:Archer AX20 V3 - binding to the tp-link cloud - HOW?
2024-03-06 12:17:00

  @Dunk-c 

 

Probably AX20 v3 is with a different WebGUI. Try the following:

Switch to route mode, setup TP-Link ID and then switch back to AP mode - then test.

Some of the features configured in router mode stay active after switching to AP mode - check the FAQ I posted.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  2  
  2  
#6
Options
Re:Archer AX20 V3 - binding to the tp-link cloud - HOW?-Solution
2024-03-06 12:37:18 - last edited 2024-03-06 12:38:33

  @Dunk-c 

Temporarily changing back to Router mode, entering the cloud info, switching back to AP mode resolved the problem.  What a rigmarole!  I guess the engineers must have a reason for making this so difficult.

I think my other routers started up by default in Router mode and then I changed them to AP mode and didn't experience this problem.

thanks 🙏

Recommended Solution
  0  
  0  
#7
Options
Re:Archer AX20 V3 - binding to the tp-link cloud - HOW?
2024-03-06 13:16:13

  @Dunk-c 

 

All TP-Link routers start by default in router mode. You probably switched to AP mode before setting up TP-LInk ID on this one.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  2  
  2  
#8
Options

Information

Helpful: 0

Views: 643

Replies: 7

Related Articles
TP-Link cloud - Archer c7
1222 1
 Archer Ax20 V3 Chipset?
778 1
TP LINK AX20 ROUTER - ONEMESH
690 0
 [Archer C50 V3] How to connect to TP Cloud?
949 2
 TP-Link AX20
858 0
Link RE450 to TP Cloud
940 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.