BE800 SFP 2.5G Mode
I have a GPON SFP which supports a maximum link of 2.5G but when I am connecting it to BE800 it only connects at 1G link
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank you very much for the feedback.
May I know your who your ISP is and the model no. of your GPON SFP? And it is connected to SFP+ port of the BE800, right?
Please also share with us screenshot of the Ethernet Status on the BE800 web interface: Network Map->Archer BE800.
- Copy Link
- Report Inappropriate Content
@SpeedxThunder Currently I can't share the web UI screenshot but it shows 1000MBps in sfp interface instead of 2500Mbps
I have 2 SFP ODI/HSGQ DFP-34X-2C2 (chipset: Realtek RTL9601D) which doesn't even connect at 2.5gbps and another FS GPON-ONU-34-20BI(Chipset: Lantiq PEB98035) which randomly connects to 2500Mbps like 2-3 out of 10 times and I am using it with Airtel Xstream Fiber connection
i am facing too much trouble due to this
- Copy Link
- Report Inappropriate Content
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
@SpeedxThunder I was using 1.0.6 debug firmware to make 2.5g work but it auto-updated to 1.1.1 and now I cant even downgrade to older firmware and I am back at 1g link speed
- Copy Link
- Report Inappropriate Content
Hi, please reply senior engineer's email to report the issue again, they will check if there is any new debug firmware or any other solution.
- Copy Link
- Report Inappropriate Content
@Sunshine i had already replied back to the original mail 1 week ago but haven't got any reply
- Copy Link
- Report Inappropriate Content
Hi, upon checking with the senior engineer, he just received a reply yesterday and will continue to follow up on your case. Please wait for the senior engineer's email.
- Copy Link
- Report Inappropriate Content
Hello, I am having the same exact issue with my BE800 and FS GPON-ONU-34-20BI. I had it working at 2.5gbps for around a week but today it dropped to 1gbps, I tried setting the internet port negotiation speed to 2.5 to no avail:
- Copy Link
- Report Inappropriate Content
Thanks very much for the feedback!
May I know who is your ISP(internet service provider)? Please share both hardware and firmware version of your Archer BE800.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2042
Replies: 25
Voters 0
No one has voted for it yet.