Deco X20 causes network problems since fw upgrade
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
Since upgrading my Deco X20 pair's firmware to 1.1.5 Build 20231026 Rel. 62511, I am experiencing regular network problems. Approximately each 7 hours the provider's HGW restarts and a gigabit switch in my network hangs. If the Decos are not switched on, these problems don't happen.
The Decos are in Access Point mode, the main one is connected to the HGW with an Ethernet cable, the backhaul between the Decos is radio.
What can I do to prevent these problems?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, May I know the model number of your ISP HGW home gateway? Can I have the model number of the network switch?
Is the current network layout like:
Internet--HGW--switch---main Deco X20~~~<Wi-Fi>~~~satellite Deco X20
If only the main Deco X20 is connected, will you have the same issue?
By the way, are you able to constantly reproduce this issue?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thanks for the reply. The issue is constant. Every 6-7 hours the problem happens. Log from the HGW: Wed 28 Feb 2024 23:09:53 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MA... Wed 28 Feb 2024 23:11:16 Warning (5) Dynamic Range Window violation Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:cb:51:d... Time Not Established Notice (6) Honoring MDD; IP provisioning mode = IPv4 Thu 29 Feb 2024 05:53:46 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MA... Thu 29 Feb 2024 05:53:53 Critical (3) REG RSP not received;CM-MAC=00:cb:51:da:91:48;CMTS-MAC=70:6e... Thu 29 Feb 2024 05:54:10 Warning (5) Unicast DSID PSN startup error Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:cb:51:d... Time Not Established Notice (6) Honoring MDD; IP provisioning mode = IPv4 Thu 29 Feb 2024 12:31:40 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MA... Thu 29 Feb 2024 12:32:01 Warning (5) Unicast DSID PSN startup error Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:cb:51:d... Time Not Established Notice (6) Honoring MDD; IP provisioning mode = IPv4 Thu 29 Feb 2024 19:10:47 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MA... Thu 29 Feb 2024 19:12:08 Warning (5) Dynamic Range Window violation Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:cb:51:d... Time Not Established Notice (6) Honoring MDD; IP provisioning mode = IPv4 Fri 01 Mar 2024 01:50:40 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MA... Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:cb:51:d... Time Not Established Notice (6) Honoring MDD; IP provisioning mode = IPv4
The HGW is a Sagemcom FAST3686 V2, Linux S/W Version 2.6.30-1.7.1mp2-svn12615
The switch is a Netgear GS608 V2
The main Deco and the switch are connected to different ports of the HGW.
_____
|--- cable --- Deco1 ~~~~ wifi backhaul ~~~~ Deco2
HGW |
|--- cable --- switch ---- cable ---- other devices
-----
I will now unplug Deco2 and see what happens.
- Copy Link
- Report Inappropriate Content
Unplugging the secondary Deco did not help. The situation is the same.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the update.
It is suggested to turn off "Smart DHCP" on the Deco X20 from the Deco APP.
After that, version 1.1.5 could be downgraded back to 1.1.4 directly via web UI.
If possible, it is also suggested to revert to 1.1.4 to see whether the current issue would stop.
How to Update the Firmware of Deco(method 2)
Wait for your reply and Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP
Downgrading the firmware to 1.1.4 did not help. HGW still reboots every 6-7 hours.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 632
Replies: 6
Voters 0
No one has voted for it yet.