Official Release Deco X50/X55_V1_1.5.5 Support WireGuard VPN, Client Speed Limit and Fixed WAN Port
This Article Applied to
Deco X50/X55_V1_1.4.1
Firmware Modifications
1. Support WireGuard VPN Server/Client.
2. Support built-in easy configuration of NordVPN/Surfshark VPN.
Note: In compliance with local regulations, the Third-party VPN feature may be restricted in specific regions.
3. Add client speed limit under clients' detailed setting page.
4. Support Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
5. Add Scene Priority under QOS.
6. Add Client MAC Identification to improve the accuracy of device detection.
7. Add more device icons in the Deco APP.
Download Link
| Deco X50_V1 | Deco X50_V1_1.5.5- updated 2024.8.12 |
| Deco X55_V1 | Deco X55_V1_1.5.5- updated 2024.8.12 |
Note:
1. *According to the user feedback and our further test, this 1.5.1 version does not support reverting to 1.4.1 via downgrade firmware recovery directly.
-Ever since 1.3.0, the firmware bin file has been over 32MB which passes the maximum file size of the HTTP uboot upgrade tool. So if you want to revert to 1.4.1, please refer to the following suggestions:
- Still run a firmware recovery on one of the satellites Deco X50 first.
- Try to upload an older official version, 1.2.2_Build_230301.zip for example,
- Then update to 1.4.1 from 1.2.2 via web UI.
- If this process works for the satellite Deco X50, We could repeat it on the main Deco later.
2. Please make sure the Deco APP is up-to-date.
3. Some features might not be available when there are other models in the Mesh network.
Configuration Procedure for the Newly-added Features
WireGuard VPN Server& Client
NordVPN/Surfshark VPN
-
NordVPN
-
Surfshark
Client Speed Limit
Manual Selection of the WAN Port
Set Scene Priority under QOS
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, The 1.5.1 firmware has been officially released. I noticed you have installed 1.5.1 now on the Deco X50. Are you able to configure the VPN via WireGuard protocol now?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Yes it's working way better than openvpn, speeds reached up to 800mbps for me, almost my full 1gbps.
- Copy Link
- Report Inappropriate Content
Hi Is there an ETA on when this firmware will be available for version 1.2 I desperately need the wan port fixing
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the message.
I haven't received any update of the ETA for V1.2 yet.
If possible, I hope you could start a new thread here(https://community.tp-link.com/en/home/forum/edit/topic?moduleId=39) (or send an email to support.forum@tplink.com) to provide the current network topology and explain what happened or why you need to fix the WAN port.
So I could forward the case to the senior engineer directly to ask for a workaround.
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Hi,
Do you have estimate when firmware 1.5.1 will be available on Decox50 ver 1.30 ?
Thank you!
- Copy Link
- Report Inappropriate Content
Hi, Usually similar firmware will gradually roll out to other models. The expected time is hard to predict.
May I know where you purchased the Deco X50_V1.3 as V1.3 is a unique version?
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Hello,
I got it from Philippines. Almost every store here is selling the V.130 model.
Hope the new firmware will be available soon. I need the wireguard support as openvpn is a bit slow for my needs.
Thank you!
- Copy Link
- Report Inappropriate Content
@David-TP Hi sorry for the late reply I made a thread you can find it here. https://community.tp-link.com/en/home/forum/topic/675962?page=1
- Copy Link
- Report Inappropriate Content
Hello, @David-TP !
I have two TP-Link Deco X55 systems deployed at two locations. Both of them are V1 hardware revision, EU variant. Yet, the latest firmware is v1.4.1 (build 20231122 rel. 40485).
How can I get the newer firmware with VPN support?
Thank you in advance.
- Copy Link
- Report Inappropriate Content
Hi, the EU and US versions of Deco X55 shared the same firmware download link of 1.5.1.
Please refer to following post to find the download link:
https://community.tp-link.com/en/home/forum/topic/674472
It would be highly appreciated if you could update later how the 1.5.1 firmware works.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 37419
Replies: 196
Voters 1
