Official Release Deco X50/X55_V1_1.5.5 Support WireGuard VPN, Client Speed Limit and Fixed WAN Port
This Article Applied to
Deco X50/X55_V1_1.4.1
Firmware Modifications
1. Support WireGuard VPN Server/Client.
2. Support built-in easy configuration of NordVPN/Surfshark VPN.
Note: In compliance with local regulations, the Third-party VPN feature may be restricted in specific regions.
3. Add client speed limit under clients' detailed setting page.
4. Support Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
5. Add Scene Priority under QOS.
6. Add Client MAC Identification to improve the accuracy of device detection.
7. Add more device icons in the Deco APP.
Download Link
| Deco X50_V1 | Deco X50_V1_1.5.5- updated 2024.8.12 |
| Deco X55_V1 | Deco X55_V1_1.5.5- updated 2024.8.12 |
Note:
1. *According to the user feedback and our further test, this 1.5.1 version does not support reverting to 1.4.1 via downgrade firmware recovery directly.
-Ever since 1.3.0, the firmware bin file has been over 32MB which passes the maximum file size of the HTTP uboot upgrade tool. So if you want to revert to 1.4.1, please refer to the following suggestions:
- Still run a firmware recovery on one of the satellites Deco X50 first.
- Try to upload an older official version, 1.2.2_Build_230301.zip for example,
- Then update to 1.4.1 from 1.2.2 via web UI.
- If this process works for the satellite Deco X50, We could repeat it on the main Deco later.
2. Please make sure the Deco APP is up-to-date.
3. Some features might not be available when there are other models in the Mesh network.
Configuration Procedure for the Newly-added Features
WireGuard VPN Server& Client
NordVPN/Surfshark VPN
-
NordVPN
-
Surfshark
Client Speed Limit
Manual Selection of the WAN Port
Set Scene Priority under QOS
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks, I installed the 1.5.1 Build 20240417 Rel. 52783 to my Deco X55 last night and things have been great for the past 24 hours or so. I really appreciate it because this was beginning to drive me insane!
I did notice that the "official" firmware seems to be a slightly older build than the one you recommended I install. Will that be an issue? Are there any discernible differences? Thanks again.
- Copy Link
- Report Inappropriate Content
@David-TP when will x20 be on the new platform?
- Copy Link
- Report Inappropriate Content
@Rikko
Yes, I follow the same procedure as you, and my X50 (V1) has successfully been updated to firmware version 1.5.1 as well. Everything working fine and no connection drop off.
This should the best firmware of all with everything working in order, IoT,QOS,ECO, and WAN port stability.
- Copy Link
- Report Inappropriate Content
X50 v1 , upgraded using x55 1.5.1 firmware 3 days before. Everything was working fine for 2 days until yesterday. Laptop with Intel ax started to use 2.4 band instead of 5Ghz, same with a desktop with Realtek. Great ping times on 192.168.68.1, deco app started to lose devices or show unknown connected on deco. Downgrade deco x50 with the latest beta. Everything is working fine now.
- Copy Link
- Report Inappropriate Content
@Billmanakos
Running this firmware for quite a while, no issues so far almost a week approaching, No weird bugs like auto disconnection or whatsoever.
Maybe I dont notice on the 2.4Ghz/5Ghz is because I turned off the 2.4ghz for main network, only IoT is on 2.4ghz.
- Copy Link
- Report Inappropriate Content
@David-TP , is my Deco x50 supported?
on my device it says Deco X50(US) Ver: 1.30 but I do not see any product page for this model number.
Please advise. Thanks!
- Copy Link
- Report Inappropriate Content
Hi, same problem occurred two days before . My network consists of two X50 and one X60. X60 and X50 are satellites of the main X50. It seams like the DHCP server stopped serving IP Addresses or something like that. Rebooted each device separately starting from X60 and ending on main X50. After rebooting the main X50 problem solved . When the problem occurred deco app showed only 3 devices from 48 connected, all other devices where disconnected or showed as disconnected. The problem first occurred with the latest beta firmware and continued with the latest firmware for X55.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, the 1.5.1 firmware here is not suitable for V1.3 of Deco X50(US).
Did you purchase the Deco X50(US) V1.3 on your own or is it provided by the internet service provider?
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi, What are the model numbers of the Deco units in your Mesh system?
"protocol and connection speed and roaming transitions", I'm not quite certain what features you refer to.
Do you wish to know the Mesh Backhaul type(for example, Wi-Fi or Ethernet Backhaul), Backhaul connection speed(It is not supported yet) and connection preference(roaming transitions?)?
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 34822
Replies: 196
Voters 1
