Home Network Community > Powerline Adapters > The 3 lights turn green in one unit so does not connect to the other
< Powerline Adapters

The 3 lights turn green in one unit so does not connect to the other

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

The 3 lights turn green in one unit so does not connect to the other

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The 3 lights turn green in one unit so does not connect to the other
The 3 lights turn green in one unit so does not connect to the other
2024-02-15 23:22:02 - last edited 2024-02-27 09:04:28
Model: TL-PA7010 KIT  
Hardware Version: V3
Firmware Version:

Hello, the pair of units was working fine and now one unit turns the 3 lights green for a second, turn them off and then turn the middle orange and the others green for another second and then turn them off, and repeat the same sequence in a loop.

 

I tried to reset but is not working.

 

Thanks !

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:The 3 lights turn green in one unit so does not connect to the other-Solution
2024-02-21 11:37:53 - last edited 2024-02-27 09:04:28

  @VictorCF 

 

Try different wall sockets, also try pressing pair button for 10s, if still the same, I am afarid the unit is defective, you could contact the retailer or local support team in your area to check warranty.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:The 3 lights turn green in one unit so does not connect to the other-Solution
2024-02-21 11:37:53 - last edited 2024-02-27 09:04:28

  @VictorCF 

 

Try different wall sockets, also try pressing pair button for 10s, if still the same, I am afarid the unit is defective, you could contact the retailer or local support team in your area to check warranty.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 402

Replies: 1

Related Articles
All Lights Turn ON and Turn OFF Immediately
325 0
green light does not turn on
3365 0
Where to buy one extra unit for the deco AX3000 X60 WiFi 3-unit System
939 0
Trouble with one unit
60 0
Three green lights but PowerLine not recognised suddenly
2859 0
 Only 2 lights are solid green
18251 18
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.