C64 + RTR

C64 + RTR

C64 + RTR
C64 + RTR
2024-02-04 10:13:53
Model: Archer C64  
Hardware Version: V1
Firmware Version: 1.13.2 Build 230824 Rel.74702n(5255)

It seems that in addition to the problem with NTP and WDS, the “Real-time Rate” is also broken in the current C64 firmware:

 

 

It is always "0 Kbps" regardless of the connection type (LAN or WLAN) :(

  0      
  0      
#1
Options
4 Reply
Re:C64 + RTR
2024-02-04 11:04:54

  @mdsf 

 

If that's on the C64 where WDS is configured, it's quite possible that this happens because the WAN port is not used.

If not, there is another bug like this one and I'm pretty sure that a new FW release is on the way.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:C64 + RTR
2024-02-04 11:18:44

  @terziyski yes (thanks!), this is on the same C64, which is configured for WDS (forgot to specify). But why should speed be considered between the end device and the Internet? It makes more sense to display the speed between the end device and the router, doesn’t it?

  0  
  0  
#3
Options
Re:C64 + RTR
2024-02-04 11:42:26

  @mdsf 

 

Probably because it would be more realistic to measure at the WAN port - a local client may communicate with another local client (LAN to LAN).

In this scenario if a measurement is at the LAN port RTR would be usually greater than if the client was communicating through the WAN port (internet).

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:C64 + RTR
2024-07-04 09:03:04

  @mdsf Any way to fix this?

  0  
  0  
#5
Options