Problem with my range extender RE190

Problem with my range extender RE190

Problem with my range extender RE190
Problem with my range extender RE190
2024-01-19 11:02:55 - last edited 2024-01-19 11:04:44
Tags: #Range extender
Model: Range Extender  
Hardware Version: V5
Firmware Version:

After a shut down my tp link RE190 started blinking and it will be solid for a few seconds and than will just start blinking again, do you know what can I do? 

  0      
  0      
#1
Options
3 Reply
Re:Problem with my range extender RE190
2024-01-22 11:38:32

  @Giuli 

 

Hi, you mean all LEDs on the extender keeps blinking or only power LED blinking and other LEDs are off? and the issue started after a power failure, right?

Please try a different wall socket, also try to reset the extender: Use a pin to press the reset button for 1 second.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Problem with my range extender RE190
2024-06-10 09:31:33 - last edited 2024-06-10 09:33:06

@Sunshine I am facing a similar issue. the power LED get's solid for a second and then all the LEDs light up and the power LED is blinking again and it never gets solid blue light. It all started happening after I shut down the device and restarted. Can you please help.

  0  
  0  
#4
Options
Re:Problem with my range extender RE190
2024-06-12 01:05:29
Hi, Please also try different power socket and reset the device. If it still cannot help, please contact the local support team to check the warranty for you.
Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 665

Replies: 3

Tags

Range extender
Related Articles