@David-TP 

Hello David,

I have noticed recently that after restarting my DECO's - MAIN M5(3.2) 1.7.8 Build 20240719 Rel. 70981 with three Satellite S4(2.0) 1.6.2 Build 20240718 Rel. 69205 - that the Connection Preference screen is clearly available for a minute or so after reboot under each connected device and I can navigate the options in the screen, all DECO's are available within the selector screen, I can select the Preferred Deco I want, save it and it shows as saved (in the shot below the main M5 is the living room and the connected device is saved to one of the S4 V2's) the Deco moves that device to the relevant S4 but then after a minute or so when you click back out to home screen and back into devices the Connection Preference option is magically gone again and the functionality is hobbled once more. This infers the functionality is there in code but is removed via config shortly after reboot. This is extremely frustrating given how much back and forth there has been around this. Can you please get a proper answer from your dev teams as to what this means and why that functionality is clearly there, functions but is then removed shortly after reboot. I think we'd all appreciate an honest answer here at this stage.

Thank you 

  @David-TP 

Would love the option to disable DHCP in AP mode for the M4R V3.0 is that available somwhere?

  @David-TP is deco m4_v2 1.7.0 stable comming? How long we will have to wait?

  @David-TP Please let us know when will receive the official release, those of us who have the M4 as an access point, need to be able to disable DHCP, this is 100000% necessary because it is failing, we cannot let months go by without answers to customers, we are losing confidence in the brand....

@David-TP

Hello, can I please get a response to the below.

thanks 

TP-no-Link wrote

  @David-TP 

 

Hello David,

I have noticed recently that after restarting my DECO's - MAIN M5(3.2) 1.7.8 Build 20240719 Rel. 70981 with three Satellite S4(2.0) 1.6.2 Build 20240718 Rel. 69205 - that the Connection Preference screen is clearly available for a minute or so after reboot under each connected device and I can navigate the options in the screen, all DECO's are available within the selector screen, I can select the Preferred Deco I want, save it and it shows as saved (in the shot below the main M5 is the living room and the connected device is saved to one of the S4 V2's) the Deco moves that device to the relevant S4 but then after a minute or so when you click back out to home screen and back into devices the Connection Preference option is magically gone again and the functionality is hobbled once more. This infers the functionality is there in code but is removed via config shortly after reboot. This is extremely frustrating given how much back and forth there has been around this. Can you please get a proper answer from your dev teams as to what this means and why that functionality is clearly there, functions but is then removed shortly after reboot. I think we'd all appreciate an honest answer here at this stage.

Thank you