Does the TP-Link AC1900 WiFi Extender (RE550) repeat any and all 2.4Ghz signal (including non-WiFi)?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Does the TP-Link AC1900 WiFi Extender (RE550) repeat any and all 2.4Ghz signal (including non-WiFi)?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Does the TP-Link AC1900 WiFi Extender (RE550) repeat any and all 2.4Ghz signal (including non-WiFi)?
Does the TP-Link AC1900 WiFi Extender (RE550) repeat any and all 2.4Ghz signal (including non-WiFi)?
2024-01-10 06:21:12
Model: RE550  
Hardware Version:
Firmware Version:

Does the TP-Link AC1900 WiFi Extender (RE550) passively and non-selectively repeat/extend/boost any and all signals produced within the 2.4GHz band, including signals from non-WiFi devices and external network devices? Also, if not, is there a setting to allow the Extender to do so like a passive, non-selective repeater? If not, will newer firmware updates add this feature to the device?

My goal is to repeat my wireless headset signal, which has a Tx/Rx dongle that operates in the 2.4Ghz range.


Thanks.

  2      
  2      
#1
Options
2 Reply
Re:Does the TP-Link AC1900 WiFi Extender (RE550) repeat any and all 2.4Ghz signal (including non-WiFi)?
2024-01-10 07:19:47

  @PettyCashPrash 

 

It's highly unlikely such feature would be implemented in the REs.

If you headset uses a bluetooth technology (2.45 GHz) or a proprietary wireless frequency, you can't repeat it with Wi-Fi range extender.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#2
Options
Re:Does the TP-Link AC1900 WiFi Extender (RE550) repeat any and all 2.4Ghz signal (including non-WiFi)?
2024-01-10 13:15:00

PettyCashPrash wrote

Does the TP-Link AC1900 WiFi Extender (RE550) passively and non-selectively repeat/extend/boost any and all signals produced within the 2.4GHz band, including signals from non-WiFi devices and external network devices? Also, if not, is there a setting to allow the Extender to do so like a passive, non-selective repeater? If not, will newer firmware updates add this feature to the device?

My goal is to repeat my wireless headset signal, which has a Tx/Rx dongle that operates in the 2.4Ghz range.


Thanks.

  @PettyCashPrash 

  1  
  1  
#3
Options