Solution Archer AX53 V1 and Archer AX72 Pro V1 IoT Network Config Lost in AP Mode after Reboot
This Article Applies to:
Archer AX53 V1 with firmware version 1.2.2 Build 20230627
Archer AX72 pro V1 with firmware version 1.2.2 Build 20230831
Phenomenon Description:
Some users have reported that when their Archer AX53 or Archer AX72 Pro router is in AP mode, the IoT network is automatically disabled after a reboot. To reinstate the IoT network, users must log into the web interface and manually enable it. However, when they switch the device to wireless router mode, this issue does not occur.
Workaround:
If you encounter similar issues, we recommend the following two workarounds, please try either one and confirm if the issue can be resolved:
Workaround 1: please try following steps:
1) Switch the device from AP mode to router mode.
2) Perform a factory reset by holding reset button for about 10s. Please note that all the previous configurations will be lost.
3) After the factory reset, switch the device back to AP mode.
4) Check if the IoT network remains enabled after a router reboot.
Workaround 2. You could also download and update the following beta firmware:
Archer AX53 V1: Archer_AX53_V1_1.2.3_Build_20230925
Archer AX72 pro V1: Archer_AX72_Pro_V1_1.2.3_Build_20240108
Note: Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
If there is still any problem after trying the two workarounds, please leave your comments with model no., hardware version, the firmware version of your TP-Link device, its working mode and detailed problem description.
By the way, if you encounter a similar issue for other models, you could also try the workaround 1 first and let us know if it solves the issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunshine When will the fix for AX72 be available? I've been having this issue since November last year!
- Copy Link
- Report Inappropriate Content
Hi, if it is the same cause, the workaround 1 should work for you as well
Workaround 1: please try the following steps:
1) Switch the device from AP mode to router mode.
2) Perform a factory reset by holding the reset button for about 10s. Please note that all the previous configurations will be lost.
3) After the factory reset, switch the device back to AP mode.
4) Check if the IoT network remains enabled after a router reboot.
- Copy Link
- Report Inappropriate Content
Hi again,
It seems like the final AX55 EU firmware is still not released by TP-Link - so eager to get this issue solved once and for all - I checked the current Archer "AX55(EU)_V1_231130.zip" against the previous Archer "AX55(TW)_V1_231130.zip" (EU vs. TW release) and guess what? The two binaries both named:
"ax55v1-up-all-ver1-2-6-P1[20231130-rel36135]_sign_2023-11-30_10.17.47.bin"
are IDENTICAL for both the TW and the EU release.
So - does this mean that you can use the newly released "Archer AX55(TW)_V1_240129.zip" containing:
"ax55v1-up-all-ver1-3-1-P1[20240129-rel57815]-1024_sign_2024-01-29_19.10.14.bin"
for AX55 V1. in EU countries and still be compliant?
Best regards
zEnterHacker
- Copy Link
- Report Inappropriate Content
Yes, the AX55 firmware is identical for TW/EU/US versions, we are also waiting for the new firmware uploaded on other EU countries' sites, if necessary, you could download it from the TW site first.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
CAssisFilho wrote
I installed the beta firmware for the Archer AX53 V1 Archer_AX53_V1_1.2.3_Build_20230925 and it worked - I no longer lost the IoT network configuration.
Thank you very much for the feedback, glad to hear that the issue has been resolved with the beta firmware.
- Copy Link
- Report Inappropriate Content
@Sunshine I tried to use the AX72 patch but it always gets upload error.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4112
Replies: 27
Voters 0
No one has voted for it yet.