Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > AX23 keeps reverting from 1gbit connection to 100mbps

< Wi-Fi Routers

AX23 keeps reverting from 1gbit connection to 100mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX23 keeps reverting from 1gbit connection to 100mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Nabuko

2023-12-28 13:28:52 - last edited 2024-01-04 12:06:00

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-12-28

AX23 keeps reverting from 1gbit connection to 100mbps

2023-12-28 13:28:52 - last edited 2024-01-04 12:06:00

Model: Archer AX23

Hardware Version: V1

Firmware Version: 1.1.0 Build 20230725 Rel. 56344(4555)

Hey guys. I have this router and it's not great. But the most annoying thing is that it keeps resetting to 100mbps every few days. I have to reset it to make it work at 1gbps again. I have the latest firmware. Is there a solution for this or this is another piece of junk?

1 Accepted Solution

terziyski

LV7

2023-12-28 19:26:10 - last edited 2024-01-04 13:02:24

Posts: 6983

Helpful: 5196

Solutions: 1143

Stories: 7

Registered: 2013-10-12

Re:AX23 keeps reverting from 1gbit connection to 100mbps-Solution

2023-12-28 19:26:10 - last edited 2024-01-04 13:02:24

@Nabuko

Usually such an issue could be resolved by changing the ethernet cable or re-crimp. A good quality cable of CAT5e/6 is required to maintain 1000mbps.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

Recommended Solution

1 Reply

terziyski

LV7

2023-12-28 19:26:10 - last edited 2024-01-04 13:02:24

Posts: 6983

Helpful: 5196

Solutions: 1143

Stories: 7

Registered: 2013-10-12

Re:AX23 keeps reverting from 1gbit connection to 100mbps-Solution

2023-12-28 19:26:10 - last edited 2024-01-04 13:02:24

@Nabuko

Usually such an issue could be resolved by changing the ethernet cable or re-crimp. A good quality cable of CAT5e/6 is required to maintain 1000mbps.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

AX23 keeps reverting from 1gbit connection to 100mbps

AX23 keeps reverting from 1gbit connection to 100mbps

Information

Voters 0

Tags