@David-TP 

Hi, is it planned that DoT/DoH as well as DNS servers can be customized? What I mean: no preset providers to choose between, please.

another thing: DDNS cannot be configured freely, I don't use any of the preconfigured providers. Will this be customized in the future?

one thing i have not yet understood: is 1.2.10 (Xe75pro) eu/german-version?

Deco XE75 Pro_V2 1.2.10_build20240325 (6.21 updated) QOS drops from time to time am isi 2 decos mtu 1500 for the 2.5 gb mtu 9000 request be abe manua set the channel

Deco XE75 Pro_V2 1.2.10_build20240325 (6.21 updated) network optimize et fu sigha on decco 2 twice

I recently updated to Deco XE75(US)_V2_1.2.8 Build 20240328 and it has been dropping connection a few times per day. What's most annoying is that I can no longer access the browser interface in order to apply updates or check status. I get the login screen and enter my password, but nothing happens (Chrome and Edge). So now I'm locked onto this unstable firmware and I can't downgrade!
(Yes I have rebooted all Deco's, power cycled, etc)

Any help would be appreciated. - @David-TP 

  @David-TP 

 

Any further user feedback on 1.2.10 for the Pro V2? I see it's been released officially in the EU now.

  @SpenceW I just installed my 3 pack of the XE75 Pro's a couple of days ago.  Upon setting them up, they immediately downloaded and installed the 1.2.10 version, and it seems to be rock solid.

 

I am not sure about the intelligence of the switching as I move about the house.... but maybe that needs to settle in for a while.

 

This Deco software also does not list the 6GHz backhaul anywhere.  I turned off the 6GHz network for client access, and I am "assuming" that it is using 6GHz for backhaul, but not 100% sure.

 

R

 

have you ra the etwork optimze o my 2 uit i have 30 plus etworks cl that might hep i requested to have manual chae setting i can use the dfs channe cut down the interference

  @Rhyalus 

 

I upgraded earlier, looks good so far. Agreed on the 6ghz backhaul, that seems to have vanished but bandwidth across the network is looking great at the moment. Will monitor over the next days but looking good so far.

Rhyalus wrote

This Deco software also does not list the 6GHz backhaul anywhere.  I turned off the 6GHz network for client access, and I am "assuming" that it is using 6GHz for backhaul, but not 100% sure.

  @Rhyalus "6Ghz Off" = 6Ghz Deidcated Backhaul

check the wfi setttig see if you ca embe 6 hx backhau o my ex75 pro 2 uit it was embed by defaaut ould recommed the current beta software