Auto Negotiation Only 100Mbps, ISP 500Mbps
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When connecting the ISP ethernet directly to my PC (without Archer AX12) with a category 6, 5e, 5 cables, it reaches 500Mbps
Similar problem: This post
Changed the cable, Forcibly enabled the 1000MB/S mode. On PC the connection speed is 500MB/s.
ISP has equipment:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You have a problem that has to be solved. Either way it's a cable issue (most probably) or a router WAN port issue.
This kind of problem has been observed in many other router models and in most cases replacing the ethernet cable solves that.
In rare cases it's because incompatible ethernet ports (FW issue) of connected devices or a faulty ethernet port.
- Copy Link
- Report Inappropriate Content
@terziyski I believe that the problem is not in the cable, the problem is not with the WAN, the problem is in the correct detection of the speed by the AX12 router, because under the same conditions my computer detects it correctly and the speed is 500Mb/s
- Copy Link
- Report Inappropriate Content
Hi, I have the same problem my ISP 300Mbps, but WAN is Auto Negotiation Only 100Mbps.
fw:1.3.9 Build 20230728 Rel. 45716. Hardware Version: V1.2
If the wan is fixed at 1Gb full duplex it will not work.
Changing cables doesn't matter with the router none of them work on gigabit , as long as they work on laptops.
Checked everything, restarted, changed everything, no change.
- Copy Link
- Report Inappropriate Content
You can read this article to answer your problem https://community.tp-link.com/en/home/forum/topic/270754
The problem in ax12 router, i also encounter the same problem and using the answer on that link i fix it
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 820
Replies: 6
Voters 0
No one has voted for it yet.