TP link Av1000 problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi I bought the tp link av1000 few days ago Ethernet ports however one of the adapters only the top light is now showing and not the bottom 2 I've swapped them around turned the Wi-Fi on and off and still doesn't fix it if tried different plugs too
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
May I ask what are the actual model numbers of the two Powerline units? It should be printed on the label on the backside, something that looks like "TL-PA7017" or "TL-WPA7517".
- Copy Link
- Report Inappropriate Content
@woozle TL-PA7017
- Copy Link
- Report Inappropriate Content
Ok, thanks.
And on one TL-PA7017 only the top light is ON and the two bottom lights are OFF, while on the other TL-PA7017 all three lights are ON? Is that what you meant?
According to the user's manual the middle light indicates whether "The powerline adapter is successfully connected to a powerline network" and the bottom light indicates whether "The Ethernet port is connected".
Normally, either the "Powerline" lights (the middle one) should be ON on both TL-PA7017 adapters or OFF on both TL-PA7017 adapters, but not one ON and the other OFF.
And if something is connected via Ethernet cable to a TL-PA7017, then its bottom light should be ON.
If that is not the case, then try to reset both TL-PA7017 adapters (Press and hold the "Pair" button for more than 6 seconds to reset the powerline adapter to factory defaults) and then pair them again.
- Copy Link
- Report Inappropriate Content
@woozle on the one upstairs on the power button is on the bottom 2 are off which I'm guessing is Wi-Fi and Ethernet?
the one plugged into the Wi-Fi the top light is on and the bottom light the middle is off I've just pressed the one upstairs for 6 seconds it's not done anything?
- Copy Link
- Report Inappropriate Content
Hmm, if both adapters have "TL-PA7017" printed on their labels, then there is no Wi-Fi. The model TL-PA7017 only supports Ethernet.
However, if one Powerline adapter is model "TL-PA7017" and the other is a model "TL-WPAxxxx", then the one with the "W" supports Wi-Fi.
Anyway, I recommend for better testing you relocate both adapters into the same room in your house.
Then try to "pair" the two Powerline adapters. > On the first Powerline adapter press the "Pair" button for a second and then go to the second Powerline adapter and press the "Pair" button for one second as well. After a while the light that has a pictogram resembling a house next to it should turn ON on both Powerline adapters.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1165
Replies: 5
Voters 0
No one has voted for it yet.