Archer c6 ddns not refreshing(using NO-IP for domain)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer c6 ddns not refreshing(using NO-IP for domain)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Isan_28

2023-11-18 12:50:05

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-11-18

Archer c6 ddns not refreshing(using NO-IP for domain)

2023-11-18 12:50:05

Tags: #DDNS

Model: Archer C6

Hardware Version:

Firmware Version:

Hi TP link community,

I have configured the ddns of my archer c6 router to automatically refresh the domain name provided by no-ip with the actual public ip address. I have a modem in front of my archer c6, and archer c6 provides the wifi for home network. I have opened the ports correctly, and i know this because, my vpn works and ddns also updates the domain name, only when router reboots or restarted. The problem is that the router does not refreshes the domain with the public ip address after 6 hours as configured. Any held would be appreciated.

Best Regards,

Isan

1 Reply

Sunshine

2023-11-20 09:28:45

Posts: 7375

Helpful: 1195

Solutions: 915

Stories: 0

Registered: 2018-12-17

Re:Archer c6 ddns not refreshing(using NO-IP for domain)

2023-11-20 09:28:45

@Isan_28

Hi, the modem in front of the Archer C6 router is a modem and router combined, right? If so, the WAN IP address on the Archer C6 would be a private IP address.

The DDNS domain name will be bound to the real public IP address, thus it would be different from the C6 Router WAN IP address, to confirm whether the DDNS is working or not, please use nslookup command to check which IP address the DDNS domain name resolves, then search what is my IP online to find your public IP address, if the two addresses are the same, which means the DDNS is actually working fine, please let us know the results.

For more troubleshooting about the DDNS function, please follow this guide:

Troubleshooting Guide of DDNS function on TP-Link Wi-Fi Router, LTE Gateway Router or Deco Router

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

Archer c6 ddns not refreshing(using NO-IP for domain)

Archer c6 ddns not refreshing(using NO-IP for domain)

Information

Voters 0

Tags