Home Network Community > Range Extenders > TL-WA850 RE UNABLE TO RECONFIGURE
< Range Extenders

TL-WA850 RE UNABLE TO RECONFIGURE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA850 RE UNABLE TO RECONFIGURE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA850 RE UNABLE TO RECONFIGURE
TL-WA850 RE UNABLE TO RECONFIGURE
2023-10-29 12:05:17 - last edited 2023-11-02 01:09:15
Model: TL-WA850RE  
Hardware Version: V1
Firmware Version: 3.14.8

Got this extender 10 years ago and changed internet provider recently. Been trough foruns, FAQ and every troubleshooting menu from your app and website but still can't get the extender to be found by the app.

 

I can connect to the extender but it's not recognized by the tether app nor via PC.

 

Can you help? 

 

Additional data:

 

ipv4: 198.168.1.88

Ipv6: 2001:818:e26b:3900:8668:e089:2a59:c6f

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TL-WA850 RE UNABLE TO RECONFIGURE-Solution
2023-10-29 16:09:00 - last edited 2023-11-02 01:09:15

  @Tommiamiranda 

 

Hi,

 

According to TP-Link's Tether compatibility list the TL-WA850RE in only supported starting with hardware version V2, while you've indicated that you have a V1.

https://www.tp-link.com/de/tether/product-list/#range-extenders

 

If you can't access the TL-WA850RE via its former IP address anymore, then you will have to perform a factory reset via the small button located next to the extender's LAN port.
Then connect your computer to it and browse to the address http://tplinkrepeater.net/ or, in case that doesn't work, try http://192.168.0.254/ .

 

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:TL-WA850 RE UNABLE TO RECONFIGURE-Solution
2023-10-29 16:09:00 - last edited 2023-11-02 01:09:15

  @Tommiamiranda 

 

Hi,

 

According to TP-Link's Tether compatibility list the TL-WA850RE in only supported starting with hardware version V2, while you've indicated that you have a V1.

https://www.tp-link.com/de/tether/product-list/#range-extenders

 

If you can't access the TL-WA850RE via its former IP address anymore, then you will have to perform a factory reset via the small button located next to the extender's LAN port.
Then connect your computer to it and browse to the address http://tplinkrepeater.net/ or, in case that doesn't work, try http://192.168.0.254/ .

 

Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 588

Replies: 1

Related Articles
  TL- WA850 RE
593 0
 TPLink WA850 RE - Connected - No internet
664 0
 TL-WA850 RE V2 no puede encontrar ninguna señal Wi-Fi para repetir
557 0
 Using 2 X TL- WA850 RE
392 0
 Repeater TL-WA850
610 0
 TL -WA850 RE shows limited connection and no internet
2501 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.