Configure WoL for Archer C80
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configure WoL for Archer C80
Hello all,
I use a tp-link archer c80 router.
I recently purchase a NAS from Synology - DS 223j witch support WoL.
Is it possible to configure the WoL using my router?
I follow the below link but i was not succesfully - https://www.tp-link.com/ro/support/faq/923/
Is there something im missing out ?
Re:Configure WoL for Archer C80
That's the correct guide for configuring WoL on your C80, just change the port that should be opened to udp port 9.
Also make sure that you have your public IP address on the C80 WAN port:
You can check your public IP address by googling "What's my IP address".
Compare these two - they should be the same for WoL to work upon proper configuration in C80.
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
