Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Set 2.4ghz on Deco X20 (Router mode) + Rename Satellites

< Deco

Set 2.4ghz on Deco X20 (Router mode) + Rename Satellites

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Set 2.4ghz on Deco X20 (Router mode) + Rename Satellites

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

GCovo

2023-10-19 06:10:46 - last edited 2023-10-20 11:41:06

Posts: 8

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-05-22

Set 2.4ghz on Deco X20 (Router mode) + Rename Satellites

2023-10-19 06:10:46 - last edited 2023-10-20 11:41:06

Model: Deco X20

Hardware Version:

Firmware Version: 1.1.4 Build 20230824 Rel. 63641

I've just set up a new X20 3 pack but my WiFi operated remote garage opener requires 2.4ghz only to connect.

I've Googled but have not found anything which works as there seems to be no way to edit or change any settings, either through the Deco app or logging in to 192.168.68.1.

I can see info such as below but no way to change.

The other thing is because the 2 satellites were automatically added they have names like Deco_3386. Is there any way to rename them without resetting and going through the add process and giving them room names to easily tell which is which? For most people that would be no problem but I have MND (ALS) so my poor, long suffering wife has to do it for me downstairs and upstairs.

Thanks in advance,

Gary

Wireless

SSID XXXXXXXX

2.4GHz Wireless :

Enable :

Channel :

5GHz Wireless :

Enable :

Channel :

1 Accepted Solution

David-TP

2023-10-20 06:40:06 - last edited 2023-10-20 11:41:06

Posts: 12509

Helpful: 1734

Solutions: 1203

Stories: 9

Registered: 2020-04-14

Re:Set 2.4ghz on Deco X20 (Router mode) + Rename Satellites-Solution

2023-10-20 06:40:06 - last edited 2023-10-20 11:41:06

@GCovo

Hi, welcome to the community.

Though Deco uses the same SSID for both 2.4GHz and 5GHz, the 2.4GHz-only smart devices are able to ignore the 5GHz and only connect to the 2.4GHz.

If it didn't, you are able to temporarily disable the 5GHz WiFi band under Deco APP>WiFi Settings>Advanced and connect the garage opener first.

And you could refer to this link to rename the satellite Deco per MAC address:

How to change the device name of Deco

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.

Set 2.4ghz on Deco X20 (Router mode) + Rename Satellites

Set 2.4ghz on Deco X20 (Router mode) + Rename Satellites

Information

Voters 0

Tags