Home Network Community > Deco > M4R 1.5.8 20230619 rel.48552 firmware update problem
< Deco

M4R 1.5.8 20230619 rel.48552 firmware update problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

M4R 1.5.8 20230619 rel.48552 firmware update problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
M4R 1.5.8 20230619 rel.48552 firmware update problem
M4R 1.5.8 20230619 rel.48552 firmware update problem
2023-10-18 04:07:31
Tags: #Firmware Update
Model: Deco M4  
Hardware Version: V4
Firmware Version: 1.5.8

Hi i ve problem after my deco updated firmware 1.5.8. The wireless internet is gone. I tried everything but it doesn't work. I reset the device. I reinstalled the network. I replaced the main device with the other device. The installation is in progress, but I do not have access to the internet. Can you help with this issue?M4

  0      
 
  0      
 
#1
Options
5 Reply
Re:M4R 1.5.8 20230619 rel.48552 firmware update problem
2023-10-18 04:57:02

@xkadirx What do you mean by " The wireless internet is gone"?

Just a M4 (2-pack) user who regrets buying it
  1  
  1  
#2
Options
Re:M4R 1.5.8 20230619 rel.48552 firmware update problem
2023-10-18 05:02:22

  @ImtiazAli sorry The device does not connect to the internet. The modem has an internet connection, I tried, but there is no internet via deco.

  0  
  0  
#3
Options
Re:M4R 1.5.8 20230619 rel.48552 firmware update problem
2023-10-18 13:05:02

@xkadirx Deco M4 (V4) doesn't have 1.5.8 firmware. They have 1.1.x firmware version.

 

Are you sure that's the correct firmware version?

Just a M4 (2-pack) user who regrets buying it
  1  
  1  
#4
Options
Re:M4R 1.5.8 20230619 rel.48552 firmware update problem
2023-10-18 13:55:33

  @ImtiazAli my device m4 v2. İ checked wrong Version.

  0  
  0  
#5
Options
Re:M4R 1.5.8 20230619 rel.48552 firmware update problem
2023-10-19 02:48:16

  @xkadirx 

Hi, After the configuration, did the main Deco turn solid red, or solid white?

If it is red, it is very likely that you might choose the incorrect internet connection type, like Dynamic IP or PPPoE.

I see you mentioned the ISP modem is fine. Did you test it with an Ethernet connection on the computer?

If yes, you could also try to clone the MAC address of the PC on Deco.

For more detailed steps, it is suggested to refer to the suggestions here:

Unable to connect to the Internet

Wait for your reply and best regards.

▶Deco BE11000/ BE63_V2.6_1.1.7 Ready for Test ▶Deco BE25_V1_1.0.17 Ready for Test! ▶Update Deco BE65 Pro to the Latest 1.1.3 Firmware Now! Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1029

Replies: 5

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.