Home Network Community > SOHO Switches > Only getting half broadband speed
< SOHO Switches

Only getting half broadband speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Only getting half broadband speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Only getting half broadband speed
Only getting half broadband speed
2023-10-15 09:42:50 - last edited 2023-10-20 10:42:31
Tags: #speed

Hi,

 

I'm using the TL-SG105 switch and only getting around half the broadband speed. Without the switch I'm back up to normal advertised speeds again so the wire is OK. I only use one connected device at a time so if I'm using my laptop I'm not using the ps5 and vice versa. I've played around with the QOS settings but to no avail.

 

Any help would be appreciated.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Only getting half broadband speed-Solution
2023-10-20 07:13:09 - last edited 2023-10-20 10:42:31

  @therock1024 

 

In this case you can check if your link speed status is correct here:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:Only getting half broadband speed
2023-10-16 00:12:48 - last edited 2023-10-16 23:05:06

  @therock1024 

 

TL-SG105 is an unmanaged gigabit switch.

There's no point messing with QoS settings of your router - that's probably a cable issue (switch port doesn't like the ethernet cable you're using).

You can compare the associated speed of your wired device using this FAQ (connected to the TL-SG105 and connected directly to your router).

If there's a difference in the associated speed in both cases use another quality cable (CAT5E/CAT6) and test again.

If there's no difference in the associated speed in both cases contact your local support for further assistance.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:Only getting half broadband speed
2023-10-20 06:05:55

  @terziyski I tried changing the cables over using cat 5E but still having the same issue. Sorry the model is TL-SG105E. I'll see how far I get with local support.

  0  
  0  
#3
Options
Re:Only getting half broadband speed-Solution
2023-10-20 07:13:09 - last edited 2023-10-20 10:42:31

  @therock1024 

 

In this case you can check if your link speed status is correct here:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 1123

Replies: 3

Tags

speed
Related Articles
 Getting only half of the speed with TL-PA4010KIT
2410 0
wifi speed is less than half
343 0
 Half speed
517 0
Wireless 5GHz speed is half of wired speed
94 0
Not getting speed in RE205
1960 0
AX11000 - cabled only half of gigabit speed
6808 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.