Home Network Community > Deco > Understand the Differences Among Deco Firmware Platforms
< Deco

Knowledge Base Understand the Differences Among Deco Firmware Platforms

12

Knowledge Base Understand the Differences Among Deco Firmware Platforms

Knowledge BaseUnderstand the Differences Among Deco Firmware Platforms
Understand the Differences Among Deco Firmware Platforms
2023-10-13 07:28:09 - last edited 2024-10-08 09:26:47
Tags: #Firmware Update #Highlighted Thread #Official

Sometimes you may question why a newer and more advanced model begins with a seemingly lower firmware version, such as 1.1.0, while older models have already reached 1.6.0. Do these firmware version numbers hold any significant meaning? Moreover, is it possible to revert the current firmware back to its original version?  In this article, we will provide an explanation of the common rules regarding Deco firmware versions. 


Begin with a brief overview of the current firmware platforms and the newly added software features they offer:

Firmware Platforms Specific Firmware Versions Enhanced New Features
1.5.0

1.5.x

1.0.x

Such as Deco M4_V2_1.5.8
1.6.0

1.6.x

1.1.x

Such as Deco M9 Plus_V1_1.6.1
1.7.0 & 1.8.0

1.7.x

1.2.x

such as Deco X50/X55_V1_1.2.7
1.9.0

1.3.x

Such as Deco X50/X55_V1_1.3.1
1.10.0

1.4.x

Such as Deco X50/X55_V1_1.4.1;

Deco X50/X55_V1.2_1.2.0

Deco X20/X60_V4/V4.6_1.2.0

Deco XE75/XE75 Pro_V1_1.4.1
1.11.0

1.5.X

Such as Deco X50/X55_V1_1.5.0

Deco X50/X55_V1.2_1.4.5

Deco X20/X60_V4_1.5.5

Deco X60_V3/3.2_1.3.0

*In compliance with local regulations, the Third-party VPN feature may be restricted to specific regions.

  • Add client speed limit under clients' detailed setting page.
  • Support Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
  • Add Scene Priority under QOS.
  • Add Client MAC Identification to improve the accuracy of device detection.
  • Add more device types under Smart Home, such as Tapo/Kasa Light Strips.
1.12.0

1.6.X

Such as Deco X50/X55_V1_1.6.0

1. Support Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
2. Added DoH/DoT under Deco APP>More>Advanced.
3. Support 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.
Note 1. Make sure the Deco APP is up-to-date.
2. Some features are not supported under Access Point mode.
3. Some features will disappear from the Deco APP if there are non-supported Deco.
4. Several models are not suitable for the general rules. Please reach the end of this Article.

 

First and Foremost!

These are common rules that apply to most Deco and it's important to note that there are exceptions as well. We will provide examples of these exceptions at the end of the articles.  Our ultimate goal is to assist users in gaining a clear understanding of the current firmware versions on their Deco. We strive to avoid any misunderstandings that could lead to inappropriate purchases.  Therefore, we kindly encourage you to confirm with us and double-check the release notes if you have any uncertainties regarding specific firmware versions. 

 

This firmware sheet will help us answer the questions at the very beginning:

Why do Newer models have a seemingly lower firmware?

We are continually expanding the Deco Whole Mesh family. At first, it would be Deco M5, M9 plus, etc. with a HomeCare security system. The firmware started from 1.3.x to 1.7.x now. Later with the addition of Wi-Fi 6/6E/7 models and the new HomeShield service, a new version series starts from 1.0.x to 1.3.x now. A lower 1.0.x or 1.1.x doesn’t represent fewer features and it is mainly used to highlight the difference.

 

Does my firmware version hold any significant meaning?

By referring to the current version numbers, you can also identify the software features that should be available on your router. If your Deco M4_v4 is on 1.1.0/1.1.1, you may understand it should support the Signal Source Selection/Connection Preference and Reboot Schedule. 

 

Can I downgrade the firmware?

Users usually could downgrade the firmware directly via web UI if the current and original versions are in the same Firmware Platforms, like from 1.5.8 to 1.5.6. However, downgrading crossing different firmware platforms often needs Firmware Recovery. A higher firmware platform often brings exciting new features and it is always not the first option to downgrade back to a lower platform. So if there are any issues after updating the firmware, we would highly appreciate it if you could start a new topic and we will promptly address your concerns.

 

Please feel free to comment below with any further inquiries.

 

Previous Posts of Firmware Inquiries

 

Deco M5_1.7.3 doesn't support VPN Server/Client

 They are all on the 1.7.0/1.8.0 Firmware Platforms but they do not support VPN Server/Client. Please refer to their individual firmware release notes.
Deco W7200_V1_1.2.2 doesn't support VPN Server/Client
Deco X3600_V1_1.2.1 doesn't support VPN Server/Client

 

Related Articles

Frequently Asked Questions of Deco Firmware Upgrade

How to update Deco firmware


 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1      
 
  1      
 
#1
Options
13 Reply
Re:Under the Differences Among Deco Firmware Platforms
2023-10-13 14:32:54

  @David-TP 

 

Helpful article, thanks, but that is not enough. Here is an example:

 

TP-Link US currently lists Deco X10 here: https://www.tp-link.com/us/support/download/deco-x10/ 

There is no firmware offered, meaning X10 comes with its original firmware and there have been no firmware updates yet. Based on that link which only offers generic user guide and on article, how one could figure which firmware platform Deco X10 belongs to, and features available for X10, before buying it?

  2  
  2  
#2
Options
Re:Under the Differences Among Deco Firmware Platforms
2023-10-16 12:20:45

  @Alexandre. 

Hi, Thank you very much for pointing it out.

The Deco X10 comes equipped with the 1.6.0 firmware platform features.

It is a bit like the Deco WiFi 7 series, like the Deco BE95/85. They came equipped with the 1.7.0 &1.8.0 firmware platform features. So far, there hasn't been a pattern for the newly released models. Most of them need to be checked case by case.

 

Best regards.

 

 

PS(May not be related to the original question):

1.Most of the multi-gateway models, like Deco X20/50/73-DSL, Deco X20/50-4G, and Deco X50-5G don't apply to the common rules.

2. The Powerline models, like Deco PX50/Deco P9 don't apply to the common rules either.

 

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options
Re:Under the Differences Among Deco Firmware Platforms
2023-10-16 15:00:00

  @David-TP 

 

Thanks for multi-gateway clarification. How about "Pro" models, will they follow same firmware platform as same but not Pro models. Examples: XE75 and XE75 Pro, X55 and X55 Pro.

  1  
  1  
#4
Options
Re:Under the Differences Among Deco Firmware Platforms
2023-10-17 02:03:59 - last edited 2023-10-17 02:09:21

  @Alexandre. 

Hi, For the "Pro" models, compared with the original model, the main difference would be an upgrade of the Ethernet ports, like from 1G to 2.5G.

It came also equipped with the latest firmware platform features(it was 1.5.0 at that time). The good thing about "Pro" models is that their firmware upgrade cycle would soon catch the steps of original models.

And they did follow the platform rules here.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Under the Differences Among Deco Firmware Platforms
2023-10-17 02:32:18

  @David-TP 

 

about the X80 non 5G model, which firmware i should use?

  0  
  0  
#6
Options
Re:Under the Differences Among Deco Firmware Platforms
2023-10-17 03:49:30

  @zcx 

Hi, Deco X80(non-5G model) also applies to this rule, and the latest firmware of Deco X80_V1_1.2.0 has supported the features on Deco 1.7.0/1.8.0 firmware platforms.

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1  
  1  
#7
Options
Re:Under the Differences Among Deco Firmware Platforms
2023-10-17 04:02:18

  @David-TP 

 

Hi, what happen if i try to install 1.9 instead of 1.7/1.8 as you recommend to..

  0  
  0  
#8
Options
Re:Under the Differences Among Deco Firmware Platforms
2023-10-17 08:18:36

  @zcx 

Hi, this post actually doesn't ask users to update their Deco to a certain firmware platform. And there hasn't been a 1.9.0/1.3.0 firmware for Deco X80 either.

It mainly provides a reference sheet of what software features you should have based on your current firmware version and what new features you can expect with future Deco firmware upgrades.

 

I think I might have misunderstood what you said at the very beginning.

If you are looking for the firmware of Deco X80, You can view its support link here:

https://www.tp-link.com/en/support/download/deco-x80/#Firmware

Best regards.

 

 

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1  
  1  
#9
Options
Re:Understand the Differences Among Deco Firmware Platforms
2023-12-03 17:16:46

  @David-TP 

 

I have acceclty the same with my x20 system. It is running the latest firmware but I'm unable to set a bandwidth limit.

 

  1  
  1  
#11
Options
Re:Understand the Differences Among Deco Firmware Platforms
2024-09-23 22:36:23

  @David-TP are the features of each firmware platform cumulative? i.e. if we have a device which now has firmware available on the 1.12.0 firmware platform, does it have all the features listed under firmware platform 1.5.0 through to 1.11.0?

  0  
  0  
#12
Options
12

Information

Helpful: 1

Views: 9892

Replies: 13

Tags

Firmware Update Highlighted Thread Official
Related Articles
Block Among Us
2726 1
Which is best among routers?
667 0
What are the differences?
372 0
 Accessibility among each other
295 0
 Deco M5 firmware differences - CA vs US
862 0
AX3000 differences
841 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.