Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > AX55 access to WAN modem via static route

< Wi-Fi Routers

AX55 access to WAN modem via static route

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX55 access to WAN modem via static route

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

paolog

2023-09-24 17:21:47 - last edited 2023-09-25 06:50:08

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-09-24

AX55 access to WAN modem via static route

2023-09-24 17:21:47 - last edited 2023-09-25 06:50:08

Model: Archer AX55

Hardware Version: V1

Firmware Version: 1.2.3 Build 20230603 rel.46473(4555)

Hello,

I've a AX55 router connected to my ISP VDSL modem via pppoE and navigation works fine.

AX55 has 192.168.2.1 address netmask 255.255.255.0 and lan/wlan clients are in same network

The ISP VDSL modem has 192.168.1.1 address and I'm trying to configure a static route entry that allow me to access the VDSL modem internal webserver from LAN clients, but I don't succeed.

Tried with

and

but none works

Any help?

Thanks in advance

Paolo

1 Accepted Solution

jra11500

LV3

2023-09-24 23:07:49 - last edited 2023-09-25 06:50:08

Posts: 289

Helpful: 114

Solutions: 14

Stories: 2

Registered: 2022-12-20

Re:AX55 access to WAN modem via static route-Solution

2023-09-24 23:07:49 - last edited 2023-09-25 06:50:08

@paolog

You probably don't need to configure a static route. Go to your PPPoE connection settings and under Advanced, set up a secondary connection. In your case you can configure the AX55 for an address such as 192.168.1.2. You will then be able to access your ISP's router from your LAN.

AX55 access to WAN modem via static route

AX55 access to WAN modem via static route

Information

Voters 0

Tags