Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > Connection Failure to VPN Server Enabled on Archer

< Wi-Fi Routers

Connection Failure to VPN Server Enabled on Archer

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connection Failure to VPN Server Enabled on Archer

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

vinarcher

2023-08-28 07:38:22 - last edited 2023-08-29 04:55:09

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-08-28

Connection Failure to VPN Server Enabled on Archer

2023-08-28 07:38:22 - last edited 2023-08-29 04:55:09

Model: Archer AX11000

Hardware Version:

Firmware Version:

Archer AX 10000

Enabled VPN Server. Generated Certificate and Exported.

Tried to connect from VPN client and I keep receiving the error: Peer Certificate Verification Error.

~~~~~~~~~~~~~~~~~~~~~~~~

I uninstall openvpn on client and reinstalled, it started working.

~~~~~~~~~~~~~~~~~~

One Issue with the VPN Server is, the speed is dead slow and poor. Normally from ISP receiving about 400 down and 24 up. Apart from Antivirus, nothing else is turned on.

once connected to VPN from client, its showing speeds of 2 and 5 from India and 10 and 8 from US.

2 Reply

Sunshine

2023-08-29 01:54:47

Posts: 7372

Helpful: 1192

Solutions: 917

Stories: 0

Registered: 2018-12-17

Re:Connection Failure to VPN Server Enabled on Archer

2023-08-29 01:54:47

@vinarcher

Hi, are you using OpenVPN Server on the AX10000 router? If so, please follow this guide to check if you've configure the VPN Server and also use VPN Client correctly:

How to use OpenVPN to access your home network through the Wi-Fi Routers

If there is still any problem, please share with us the screenshot of your VPN Settings and also hardware and firmware version of your AX10000 router.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

vinarcher

LV1

2023-08-29 05:06:32

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-08-28

Re:Connection Failure to VPN Server Enabled on Archer

2023-08-29 05:06:32

@Sunshine

Thank you. I did the entire setup again referring to the video and it's working. It wasnt showing the home ip on client, but that got resolved after sometime by itself.

How ever the speeds when connecting from the client are very poor. about 10 and 8. Is there anything that can be done.

Apart from the Antivirus thats built in, nothing else is turned on.

also is there another router that can act as client to this and have a kill switch to block internet outside of this vpn.

Connection Failure to VPN Server Enabled on Archer

Connection Failure to VPN Server Enabled on Archer

Information

Voters 0

Tags