Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > AX20 meshed with VX230V very weak signal

< Wi-Fi Routers

AX20 meshed with VX230V very weak signal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX20 meshed with VX230V very weak signal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

thunderboltvn

2023-08-25 04:43:44 - last edited 2023-08-27 05:47:34

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-08-25

AX20 meshed with VX230V very weak signal

2023-08-25 04:43:44 - last edited 2023-08-27 05:47:34

Model: Archer AX20

Hardware Version: V3

Firmware Version:

After I meshed AX20 v3 with VX230V (all wwith latest firmwares) but got very weak signal althoug they are close together.

6 Reply

Sunshine

2023-08-28 02:56:52

Posts: 7375

Helpful: 1195

Solutions: 915

Stories: 0

Registered: 2018-12-17

Re:AX20 meshed with VX230V very weak signal

2023-08-28 02:56:52

@thunderboltvn

Hi, thank you very much for posting on TP-Link Community.

The VX230v is your main router, right? If you use a smartphone at the AX20 location to connect the main router 5G WiFi, is the signal strong or not?

Please try to change 5G WiFi channel on your main router to see if the signal strength will be better when AX20 connects to it.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

thunderboltvn

LV1

2023-08-28 04:56:10 - last edited 2023-08-28 09:05:14

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-08-25

Re:AX20 meshed with VX230V very weak signal

2023-08-28 04:56:10 - last edited 2023-08-28 09:05:14

@Sunshine Yes, VX230V is my main router. The meshed signals are weak even they are close together. I have another AX20_8728 but don't know why it use 2.4GHz to connect with the AX20_4E88 although it ever meshed 5GHz with VX230V when setup. What is the best channel for these three devices for 5GHz and 2.4GHz?

ME_C

LV1

2023-11-23 17:32:43

Posts: 4

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2023-09-29

Re:AX20 meshed with VX230V very weak signal

2023-11-23 17:32:43

@thunderboltvn @Sunshine

Is any solution found for this issue/problem?

I have had the similar issue/problem with VX230v (as the main router) and RE705X (as the agent) in the EasyMesh.

Sunshine

2023-11-24 03:38:54

Posts: 7375

Helpful: 1195

Solutions: 915

Stories: 0

Registered: 2018-12-17

Re:AX20 meshed with VX230V very weak signal

2023-11-24 03:38:54

@ME_C @thunderboltvn

Hi, it is recommended to turn off the satellite units and use a client device next to the main router to check the main router signal strength to see if the issue exists on the main router or other satellite units.

Or you could also use WiFi Analyzer etc. to scan the wireless signals and check the signal strength of each signals.

thunderboltvn

LV1

2023-11-24 07:50:00

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-08-25

Re:AX20 meshed with VX230V very weak signal

2023-11-24 07:50:00

@Sunshine I dont think we have the solution at the moment. The problem is from the software/firmware. I have tested all the possible cases already but it did not work, very slow and unstable.