Home Network Community > Wi-Fi Routers > Archer C80 v1 new firmware 1.13.1 super buggy
< Wi-Fi Routers

Archer C80 v1 new firmware 1.13.1 super buggy

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

Archer C80 v1 new firmware 1.13.1 super buggy

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C80 v1 new firmware 1.13.1 super buggy
Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-15 15:48:44 - last edited 2023-08-22 11:07:32
Tags: #Firmware Update
Model: Archer C80  
Hardware Version: V1
Firmware Version: 1.13.1

There was a new firmware update for archer c80 v1 to 1.13.1 yesterday and now the webpage of the router doesn't show any clients connected and even in the tether app it shows a list of clients but never updates and new devices don't show up there at all. It's very buggy and sometimes I can't even get to the webpage for the router. Renaming of devices don't work and changing of icons don't stay either. Also I can't access the router when I'm out of my home network as well. The previous firmware worked very well and I tried to downgrade but it doesn't let me. I have tried restarting the router several times and deleted and reinstalled the tether app but nothing changes. Please issue a bug fix asap. This new firmware is super unstable and I can't downgrade. 

  2      
 
  2      
 
#1
Options
1 Accepted Solution
Re:Archer C80 v1 new firmware 1.13.1 super buggy-Solution
2023-08-22 11:07:25 - last edited 2023-08-22 11:07:32

@aceedburn   @abhhii10   @Dinu_ks 

 

Hello All, thank you for all of your feedback and detailed information about the new firmware issue.

 

I'm happy to share public beta firmware here with the community, which could fix the issue you encounter. Please get the direct download link for the beta firmware from the below thread:

Solution to Fix Tether App Remote Manage Failure and Client List Empty Issue on Archer C80 1.13.1

 

I hope this help fix the issue but do let me know if it's not. We're happy to assist and follow it up.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#23
Options
27 Reply
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-16 01:41:32

  @aceedburn 

 

Hi, thank you very much for posting on TP-Link Community.

Please try resetting the router to factory defaults by holding the reset button until power LED starts flashing, clear the browser cache on your computer and then configure the Archer C80 router from the scratch.

 

After that, please check both the web interface and the Tether App management to see if there is still any problem.

 

By the way, for the remote access to the router via Tether App, you mean the router shows offline, or it shows online on the App but unable to login? what is the error message?

 

After the above troubleshooting, if the issue still exists, we would like to forward your case to our senior engineer for further debugging and analysis.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-16 03:31:14

  @Sunshine I have tried factory restore and still have the same problem. Devices don't show in my client list and everything is so buggy with this firmware.attached picture is when I try to access my router via tether outside my network.  Do you have a latest firmware for this for me to try?

  0  
  0  
#4
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-16 09:41:46

 Still cannot after doing factory restore again. This new 1.13.1 firmware is problematic. Please issue a fix asap. This is really frustrating. Also still cannot access the router via tether outside of the network. What is happening.?

  1  
  1  
#5
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-16 10:35:54

same issue in my archer c80. while log in tether app and log in router through web page client get vanished .Have to reboot . Bug in This Firmware released fresh one.

  0  
  0  
#6
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-16 12:50:18

  @aceedburn Another problem: this new firmware doesn't allow me to control my wireless speakers through the house. They are not recognised by the sound system app on my IOS and Android phones and tablets.

  0  
  0  
#7
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-17 11:04:53

  @aceedburn 

 

Hi, thank you very much for the reply.

To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-17 11:14:20

  @aceedburn @abhhii10 @OliBulgar 

 

Hi, if you are not using EasyMesh function on Archer C80 with other EasyMesh satellite devices, please try disabling EasyMesh on the Archer C80, then check if the problem still exists.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#9
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-17 11:44:51 - last edited 2023-08-17 11:45:30

  @Sunshine I do use a re450 as a easy mesh satellite device. And yes I have tried disabling it previously and the problems still persist. No remote access and clients list are empty in web gui and not updated in tether. 

  0  
  0  
#10
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-17 11:55:41
  •   @Sunshine 
  • While Log in Through TETHER App in cloud mode and there after  log in router through web page this kind of error occur. client   list get vanised and There is no device in list as it connected within the router . There is dhcp server list also nill. Have to  reboot the  router to make it normal. Used the Google chorme in pc. I done off the easy mesh but no any efffect whether it is on or off .
  0  
  0  
#11
Options
Re:Archer C80 v1 new firmware 1.13.1 super buggy
2023-08-17 12:21:12 - last edited 2023-08-17 12:24:04

  @Sunshine after disabling and enabling the re450 now it shows as re550 instead. And when I try to rename the satellite device it says saved but then in device list it appears as re550. I have a re450. And it also shows 2 re550 devices in my device list but I only have 1 re450. It could be also be an issue with tether and also tp-link cloud that's causing these problems. I did unbind from cloud and re bind but still same problem. When unbind it only shows 1 satellite in device list. When bind with cloud again it shows 2. Earlier firmware was totally good. Please release a new firmware to solve all these problems. More and more problems are being discovered now. 

  0  
  0  
#12
Options
123

Information

Helpful: 2

Views: 3472

Replies: 27

Tags

Firmware Update
Related Articles
Link to the new V1 Firmware US/EU Archer C80
559 0
archer c80 firmware upgrade dilemma
1162 0
New Archer C80 - Unstable WIFI.
2508 0
 Firmware update for Archer C80 v1
1537 0
Can I flash C80 US firmware onto C80(CA)?
83 0
Archer c80 firmware upgrade changed internal ip address
1364 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.