Home Network Community > Deco > Improve Network Status and APP Control on Deco X50/X55
< Deco

Solution Improve Network Status and APP Control on Deco X50/X55

Solution Improve Network Status and APP Control on Deco X50/X55

SolutionImprove Network Status and APP Control on Deco X50/X55
Improve Network Status and APP Control on Deco X50/X55
2023-08-15 08:24:46 - last edited 2024-06-25 02:56:09
Tags: #Highlighted Thread #Official
Model: Deco X55   Deco X50  
Hardware Version: V1
Firmware Version:

This Article Applies to:
Deco X50/Deco X55_V1

 

 

Issue Description:
In a large or high-density wireless network, usually, more than 3 Deco units are installed around the house to provide high network throughput and full WiFi coverage. With the network system running over time, some issues may arise if the unnecessary background processes run out of most of the RAM usage, such as:

  1. Deco APP is slow to load or sync with the latest network status.
  2.  Clients are missing or display the wrong online/offline status and connection type.
  3.  Advanced features are missing under Deco APP>More or get "unable to save, please try again later" during configuration.

 

 

Available Solution:

Please make sure both your Deco APP and Deco X50/X55_V1 are up-to-date. The latest version should fix the issues here already.(updated 6.25)

 

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  3      
 
  3      
 
#1
Options
7 Reply
Re:Improve Network Status and APP Control on Deco X50/X55
2023-08-17 05:26:27

 Hey  @David-TP,  Can this firmware be made available for the XE75 Pro

  2  
  2  
#2
Options
Re:Improve Network Status and APP Control on Deco X50/X55
2023-08-17 07:54:10

  @BenGinders 

Hi, It is for Deco X50/X55 only but there will be more for other models.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options
Re:Improve Network Status and APP Control on Deco X50/X55
2023-08-21 16:44:25

  @David-TP 

Do you have any information on the X55 Pro firmware update? The current firmware is quite limited in terms of basic features. There's no IoT network, band preference, or node preference options. It's surprising that TP-Link seems to have overlooked their first multi-gig mesh like this.

I'm also experiencing issues with a Deco unit and have been in contact with TP-Link Customer Support via email. I've been waiting for almost 2 weeks for the TP-Link engineering team to reach out, but I've just received another similar email asking me to wait for engineering assistance again lol.

  3  
  3  
#4
Options
Re:Improve Network Status and APP Control on Deco X50/X55
2023-08-23 19:12:47 - last edited 2023-08-23 19:29:35

Agreed. Any firmware optimization is a bonus.

  4  
  4  
#5
Options
Re:Improve Network Status and APP Control on Deco X50/X55
2023-08-30 08:14:29

  @David-TP nice to see this beta, i have just experienced an ethernet backhaul speed degradation from 1gbps to 100mbps in a 2 Deco X50 setup, hope this beta can fix this also, just installed & testing.

  1  
  1  
#6
Options
Re:Improve Network Status and APP Control on Deco X50/X55
2023-09-17 22:22:25

  @David-TP 

Hi,

Is it possible to add firewall rules to customize block port 

 

 

 

  0  
  0  
#7
Options
Re:Improve Network Status and APP Control on Deco X50/X55
2023-09-18 02:15:27

  @Manuel-H 

Hi, Thank you very much for your feedback. 

Can you give me an example, like which port and why?

Usually, the ports will block all the inbound traffic by default for security concerns.

PS. It would be great if you could start a new thread here:

https://community.tp-link.com/en/home/forum/2252

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#8
Options

Information

Helpful: 3

Views: 2513

Replies: 7

Tags

Highlighted Thread Official
Related Articles
 Fail to Update the Firmware of Deco X50-5G via Deco APP
1089 0
 New 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
20562 8
 Deco APP supports Parental Control Widgets
1084 0
 Deco X50-Outdoor Won't Reliably Connect to the Mesh after 1.2.1 Firmware Upgrade
5371 1
  Advanced Parental Control Offer for HomeShield Pro Users
4475 3
 Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
6894 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.