Home Network Community > Wi-Fi Routers > Loss of speed
< Wi-Fi Routers

Loss of speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Loss of speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Loss of speed
Loss of speed
2023-07-31 15:15:37 - last edited 2023-07-31 17:59:27
Tags: #Bandwidth Control/QoS
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.3.0 20221208 rel. 45145

Hi,

 

I have a setup where i need to use my network operators router as modem and then have my archer (with the network operators wifi being turned off).

 

I have paid for 500/500 MBIT but for some reason i only manage to get just below 200 mbits even when i connect cable to the Archer (actually the same speed on wifi). When i change the cable from my computer to the network operators router its upp to 500/500 again. This also occurs when i go into the official Tether app and initiate a speed test - turns out to be 500/500!

 

What can be the issue here?

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Loss of speed-Solution
2023-07-31 17:10:32 - last edited 2023-07-31 17:59:27

  @AForce 

 

If you have any bandwidth control or QoS configured on the AX6000 - disable all of these and test again.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#2
Options
7 Reply
Re:Loss of speed-Solution
2023-07-31 17:10:32 - last edited 2023-07-31 17:59:27

  @AForce 

 

If you have any bandwidth control or QoS configured on the AX6000 - disable all of these and test again.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#2
Options
Re:Loss of speed
2023-07-31 18:00:00

  @terziyski it worked!!! after 2,5h in contact with support over chat and numerous testing and screenshotting without getting it resolved... Thank you sooo much!

  0  
  0  
#4
Options
Re:Loss of speed
2023-08-03 15:01:49
Hi again, for some reason its now down to 80-100 mbit in wifi. I havent changed anything except removing qos. Initially it worked and i got 500 mbit over wifi as well. Now i only get those numbers when checking speed through the tether app. what can be the issue now?
  0  
  0  
#5
Options
Re:Loss of speed
2023-08-03 16:52:03 - last edited 2023-08-03 16:52:25

  @AForce 

 

You maximum bandwidth on a wireless connecton depends on what wireless band you're connected at the moment.

To enjoy the full potential of your wireless speed you have to be connected on the 5GHz band and the wirless channel width should be 160Mhz.

You can check these parameters on your devices' wireless connection status. Here's a story which gives  some directions on that.

Here's an example of wireless settings that I am using:

 

 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#6
Options
Re:Loss of speed
2023-08-03 23:23:55

  @terziyski i tried all of that but it didnt work. now  resetted everything and cant even get 5ghz to work. Pleeeeeease can i have some more info to at least get back to status quo. I realized before when i resetted i gor up to 300 mbit but only for like 10 sec before it went back.

 

now i h ave like 2 mbit....and loosing 5ghz 

  0  
  0  
#7
Options
Re:Loss of speed
2023-08-03 23:32:05
now i cant even get the password for 5ghz to work... please help
  0  
  0  
#8
Options
Re:Loss of speed
2023-08-04 00:14:45

  @AForce 

 

Connect to your router by an ethernet cable to isolate wireless issue you have.

Set the wireless channel and channel width to "Auto", then test the wireless connectivity on 5Ghz band.

If everything is OK leave it as it is or else you can tweak these until you find the sweet spot for your wireless connection.

If that doesn't help reset the AX6000 to its factory defaults from the WebGUI or by the reset button and re-configure from scratch.

Remember - do not configure any QoS or bandwidth limiting settings.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#9
Options

Information

Helpful: 0

Views: 955

Replies: 7

Tags

Bandwidth Control/QoS
Related Articles
Loss of internet speed on AX55
531 0
 Speed loss
1474 0
 loss internet speed
354 0
 Massive Loss of speed
511 0
 sudden loss of speed
457 0
 Small internet loss on AX60000
435 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.