Network instability in BE85 mesh network
I recently implemented a new mesh wifi-network using the new Deco BE85 units. The characteristics are as follows:
- The main Deco unit is directly connected to the Zyxel modem/router (viber 1 GB up/down);
- I use a TL-Link switch for all the cat 5e ethernet lines throughout the house (POE is disabled for now);
- The other 2 Deco units are located on the first floor and attic using the ethernet backhaul;
- The network has been set to router mode first (love the features there), but now back to access point mode;
- I'm not using the Wi-Fi 7 or 6E features.
I've seen some strange behaviour for which I need your support:
- Apple HomePods (2nd gen and mini) drop off the network from time to time, always requiring a full factory reset when it happens. They just don't reconnect anymore once they drop off. I've tried using a fixed IP (Deco in router mode), disabling the mesh for these devices and even specifying a preferred Deco unit to connect to;
They advised the network setup as I have implemented and described above; - Downloading apps or iPhones updates does not work anymore, though regular browsing, watching videos etc. is working as expected. When I try to install or update an app for the IOS app store, it doesn't always succeed. It gets stuck when downloading. Same goes for downloading IOS updates. I have not been able to download an update (2-6 GB) after implementing the new network;
- Downloads from the internet fail from a Windows PC even if these are only 200-300 MB.
I'm looking for any help to stop me from returning the equipment. Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@FabianC out of curiosity, what's the workaround?
I had purchased BE85 units a few months ago and had data corruption issues / inability to finish downloads. See https://www.reddit.com/r/TpLink/comments/12uip0c/comment/jnuqdqg/?utm_source=share&utm_medium=web2x&context=3 for more detail.
I also worked with Aaron and provided a ton of information surrounding the issue. Ultimately, TP-Link wasn't able to resolve the issue before my return window was going to expire so I had to return the devices.
Ended up going with eero Pro 6Es and have been pretty happy.
My hunch is that the Linux drivers for the new Qualcomm chips used in TP-Link's WiFi 7 kit aren't mature enough yet, and/or some sort of hardware acceleration engine is causing data corruption.
- Copy Link
- Report Inappropriate Content
@ampx they provided me with a custom firmware and had me run a command that stops an specific Qualcomm service/feature. As soon as I do that everything works as expected.
So, it seems your assumption is correct, it's somewhere along those lines.
- Copy Link
- Report Inappropriate Content
Hello everyone, I am having the exact same issue, I tried a number of different combinations of upstream internet connection, disabling/enabling features, different computers, using different access points in the network, the issue can safely be pin-pointed to the be85's wifi corrupting packages which affects downloads larger than around 50-200mb.
How did you get the support team to fix the issue? Is there a beta firmware download available somewhere?
Thanks a lot in advance.
- Copy Link
- Report Inappropriate Content
@danilo404 I gave up and returned the Deco BE85s, switched to eero and it's been smooth sailing ever since.
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
I see a new firmware is in the release process and this firmware version might fix the reported issue here.
Please wait for a moment and let me check with the engineers first to see whether we can get a download link.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thank you for the quick reply, I still have a few days for my return period so I can wait. I also sent an email to support with a few more details and error messages.
Kind regards.
- Copy Link
- Report Inappropriate Content
@danilo404 can confirm a beta firmware solves the issue, I've been running it for a few weeks and everything works great. I was told by support/R&D the fix will make its way to a public release.
Maybe David can help you get the beta version in the meantime.
- Copy Link
- Report Inappropriate Content
. 
.- Copy Link
- Report Inappropriate Content
@ampx I was in touch with support for several days, but in the end I returned the devices and switched to Ubiquiti. Everything worked like a charm!
- Copy Link
- Report Inappropriate Content
I will return mine too ... useless and too much instable !
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 5123
Replies: 33
Voters 3
