Early Access [Topic Closed] Pre-Released Firmware Supports DoH and IoT Network for Archer C80 is Ready for Trial
The official firmware for a number of models has been rolling out to support DoH and IoT Network, please check for the updates on your router web GUI or via the Tether App to upgrade to the latest official version to try it out.
Check the below thread to get more details:
Wi-Fi Routers Support DoH and IoT Network
--------------------------------------------------------------------------
Good news!
We are happy to announce that there is new official firmware for Archer C80, which adds DoH, IoT Network, and a number of new features. We would like to share and provide early access to this specific version of firmware with the community. Don't hesitate to upgrade and install this pre-released firmware to try it out.
Direct Download link for pre-released firmware has been invalid.
Notes:
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding!
2. You can still upgrade to the official firmware if there is any.
3. Some new features would not be available when the router works in Access Point mode.
4. This public beta firmware for Archer C80 can be applied to all versions (EU/US/JP/TW/etc.).
Releases Notes
Modifications and Improvements:
1. Added support for DoH.
You can go to Advanced > Network > Internet page to enable DoH. See the screenshot below.
There are 3 built-in DoH Servers: dns.quad9.net, dns.google, and cloudflare-dns.com, you can choose one at a time.
2. Added IoT network and IoT security.
- IoT Network: Advanced > Wireless > IoT Network.
- IoT Security: Advanced > Security > IoT Security.
3. Added support for Alexa
4. Added support for HTTPS access.
5. Optimized the guest network, and supports Access Time Control and Bandwidth Control. (Refer to FAQ 3299)
6. Optimized the EasyMesh, and supports upgrading multiple devices at the same time.
7. Optimized the UI.
Bug Fixes:
1. Fixed several bugs related to IPTV.
2. Fixed several UI bugs.
3. Fixed the bug that the pin doesn't work under certain scenarios.
4. Fixed a compatibility bug with certain intel network cards.
This latest version also includes some other enhancements and bug fixes. Take your time to explore all the great features or enhancements. Comment below if you have any feedback or run into any issues — we’re here to help.
Related Articles:
Wi-Fi Routers Support DoH and IoT Network
Other Articles that you may also be interested in:
EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Is DoH implemented properly? I have already enabled the setting but running a one.one.one.one test shows that it is not seen?
https://one.one.one.one/help/#eyJpc0NmIjoiWWVzIiwiaXNEb3QiOiJObyIsImlzRG9oIjoiTm8iLCJyZXNvbHZlcklwLTEuMS4xLjEiOiJZZXMiLCJyZXNvbHZlcklwLTEuMC4wLjEiOiJZZXMiLCJyZXNvbHZlcklwLTI2MDY6NDcwMDo0NzAwOjoxMTExIjoiTm8iLCJyZXNvbHZlcklwLTI2MDY6NDcwMDo0NzAwOjoxMDAxIjoiTm8iLCJkYXRhY2VudGVyTG9jYXRpb24iOiJNTkwiLCJpc1dhcnAiOiJObyIsImlzcE5hbWUiOiJDbG91ZGZsYXJlIiwiaXNwQXNuIjoiMTMzMzUifQ==
- Copy Link
- Report Inappropriate Content
In most cases you can't downgrade to a lower major version (like 1.13.x to 1.12.x) via the normal procedure. You could only downgrade between minor version numbers, for example 1.13.2 to 1.13.1 and so on.
- Copy Link
- Report Inappropriate Content
@woozle so that means im gonna have to wait till they release the official version?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
So you not using the defective Beta version any more? 
So you've reverted back to "Archer C80(EU)_V1_1.12.0 Build 221010" firmware version?
I've not heard from the TP link engineer for a week now so no updates on the issue with accessing the C80 remotely unfortunately.
cheers
- Copy Link
- Report Inappropriate Content
hi @klipse,
I did this before i could install the betà version.
So due to this action i could install the betà.
Still running the betà 😬
Regards,
Thom
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Mark is right. There is currently no plan to support EasyMesh for MR600 or MR400. And here is the EasyMesh Product List.
We will keep an eye on this kind of feature request and forward your request to the related department for consideration.
- Copy Link
- Report Inappropriate Content
sajinala wrote
@Kevin_Z how can i return back to the current firmware, my ar her c80 prevents me
@sajinala woozle could be right. Generally, you cannot downgrade to a previous version from a higher version, like 1.13.x to 1.12.x.
While since this is a pre-release version, you can still try to downgrade as suggested by Thom_NL. If that fails, please don't worry, we will look into the issue you reported in another thread.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 18640
Replies: 142
Voters 2
