@David-TP 

Yes, I have enabled SRA, but the initial DSL connection locks the current speed. It does not adapt even though the maximum speed changes, so SRA, which starts with 7dB, decreases to 6dB and 5dB.

Therefore, errors increase after a while. It is necessary to provide the SNR adjustment to the user. It is unfortunate that this setting is available on cheaper modems in the market but not on TP-Link. I hope this setting will be added as soon as possible.

  @David-TP  such a problem occurs, packet losses increase a lot and the internet connection is lost



 

  @David-TP After 1 day of DSL operation, it starts to give too many error logs and the internet connection is not used and I have to restart it. I was using DLA disable, SNR 11-12db, ESNP enable, G.INP enable in my old modem and I was not having any problems. Why are the VDSL settings on a cheaper modem not available on the deco x50-dsl?

thousands of error records in minutes



my old device settings

  @Redali I'm having trouble with this issue because there are interruptions in the connections due to low SNR (Signal-to-Noise Ratio) in the dB. This setting should be made available to users. I also need to increase the SNR setting. If possible, even the ESNP - Enhanced Sudden Noise Protection and G.INP Stability Adjustment settings should be made available to users.

  @Redali I fully support it. Please add it TPLink.