Home Network Community > Feature Request (Deco) > Deco X50-DSL Adjust SNR Setting
< Feature Request (Deco)
 
23
Votes

Deco X50-DSL Adjust SNR Setting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
 
23
Votes

Deco X50-DSL Adjust SNR Setting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco X50-DSL Adjust SNR Setting
Deco X50-DSL Adjust SNR Setting
2023-07-12 07:35:38 - last edited 2023-07-13 06:19:32

Sometimes I experience signal attenuation on my DSL line. Since the SNR margin is set automatically, it usually stays at around 6-7 db. This causes disconnections and slow internet speed after a certain period of time. With my old modem, I was able to adjust the SNR margin and set it at 12dB, which resolved the issue completely. Please add the option to adjust the SNR margin.

#1
Options
9 Reply
Re:Deco X50-DSL Adjust SNR Setting
2023-07-13 06:23:33

  @Redali 

Hi, Welcome to the community.

I will add it to the community feature request list first and check whether more users have the same needs.

Have you tried to enable SRA  under Deco APP>>More>>Advanced>>DSL Settings>>DSL status>>enable SRA?

 

Thank you very much.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
#2
Options
Re:Deco X50-DSL Adjust SNR Setting
2023-07-13 07:28:08

  @David-TP 

Yes, I have enabled SRA, but the initial DSL connection locks the current speed. It does not adapt even though the maximum speed changes, so SRA, which starts with 7dB, decreases to 6dB and 5dB.

Therefore, errors increase after a while. It is necessary to provide the SNR adjustment to the user. It is unfortunate that this setting is available on cheaper modems in the market but not on TP-Link. I hope this setting will be added as soon as possible.

#3
Options
Re:Deco X50-DSL Adjust SNR Setting
2023-07-13 20:25:12

  @David-TP  such a problem occurs, packet losses increase a lot and the internet connection is lost



 

#4
Options
RE:Deco X50-DSL Adjust SNR Setting
2023-07-14 05:22:42
A useful feature allows DSL users experiencing issues to act more flexibly according to their own preferences. I support it.
#5
Options
Re:Deco X50-DSL Adjust SNR Setting
2023-07-15 06:30:22

  @David-TP After 1 day of DSL operation, it starts to give too many error logs and the internet connection is not used and I have to restart it. I was using DLA disable, SNR 11-12db, ESNP enable, G.INP enable in my old modem and I was not having any problems. Why are the VDSL settings on a cheaper modem not available on the deco x50-dsl?

thousands of error records in minutes



my old device settings

#6
Options
Re:Deco X50-DSL Adjust SNR Setting
2023-07-18 19:35:40

  @Redali I'm having trouble with this issue because there are interruptions in the connections due to low SNR (Signal-to-Noise Ratio) in the dB. This setting should be made available to users. I also need to increase the SNR setting. If possible, even the ESNP - Enhanced Sudden Noise Protection and G.INP Stability Adjustment settings should be made available to users.

#7
Options
RE:Deco X50-DSL Adjust SNR Setting
2023-07-24 07:13:39
I hope this feature will be added as soon as possible. I am having the same problem. I constantly have to reboot.
#8
Options
Re:Deco X50-DSL Adjust SNR Setting
2023-12-04 18:46:50

  @Redali I fully support it. Please add it TPLink.

#9
Options
RE:Deco X50-DSL Adjust SNR Setting
2023-12-04 18:47:02
need
#10
Options

Information

Helpful: 23

Views: 1191

Replies: 9

Voters 21

voter's avatar
voter's avatar
voter's avatar
voter's avatar
+ 17 Voters
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.