Home Network Community > Powerline Adapters > Instable wifi with TP-Link TL-WPA7617 kit
< Powerline Adapters

Instable wifi with TP-Link TL-WPA7617 kit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Instable wifi with TP-Link TL-WPA7617 kit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Instable wifi with TP-Link TL-WPA7617 kit
Instable wifi with TP-Link TL-WPA7617 kit
2023-06-25 09:31:09
Tags: #Wi-Fi Move #Powerline
Model: TL-WPA7617 KIT  
Hardware Version: V1
Firmware Version: 1.0.10 Build 220701 Rel.65093n (6985)

Hello,

 

I have my TL-PA7017P adapter connected to the electricity socket and via an ethernet cable directly to the modem. My TL-WPA7617 is connected to another socket, on the other side of the house. All the relevant LEDs are connected, i.e., ON, WI-FI and the POWERLINE.

The signal I get at about 5 meters from the second device is spotty. At 2.4 GHz, my download speed on the laptop I'm using was 10 MBps and upload speed was 9MBps. It does not have a 5 GHz antenna. However we all have iPhones and experience the same spotty connection at the two frequencies.

Is there any way I can enhance the signal?

  0      
 
  0      
 
#1
Options
2 Reply
Re:Instable wifi with TP-Link TL-WPA7617 kit
2023-06-26 10:53:13

  @Blulaptop 

 

Hi, you mean the wireless connection will disconnect completely, or it is still connected but no internet access?

 

Please try to change Wi-Fi channel and channel width on the extender web interface to see if the connection will be more stable.

 

By the way, if possible, please connect a computer to the powerline extender by Ethernet cable to see if the Ethernet connection always works fine.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Instable wifi with TP-Link TL-WPA7617 kit
2023-06-27 13:40:14

  @Sunshine 

Thank you for your message.

Most of the time I keep having signal, but no internet connection.

I was having a lot of problems using my VPN, to the point where the solution found was to disconnect the ethernet cable between the router and the powerline. It works fine for a while, until I completely lose internet and need to connect back the cable.

I will try with another cable from the extender to my laptop to see what happens. I will hold off on changing any channels, as I'm not an expert and most likely will lose internet for good : (

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 756

Replies: 2

Tags

Wi-Fi Move
Powerline
Related Articles
Low Mbps with my TP-Link TL-WPA7617 AV1000 Wi-Fi Kit Powerline
254 0
TL-WPA7617 kit not pairing
796 0
 OneMesh Compatibility on TL-WPA7617 KIT and TL-WPA7517 KIT
762 0
 Problem with TL-WPA7617 KIT
503 0
TL-WPA7617 no onemesh no firmware?
570 0
 TP-Link TL-WPA7617 KIT
682 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.