Deco PX50 not using Powerline backhaul
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I've upgraded from Deco M4R to PX50 as I wanted to move to WiFi 6 but also utilise Powerline as a backhaul for extending my wired network to a corner of the house where there is no existing wired ethernet trunking. This is also to reduce reliance on wireless backhaul as the area I live is very congested on the 2.4GHz band. I'm running in AP mode as I have an OPNsense router/firewall.
Plugging in the PX50 to the main switch, then the remote PX50 with the ethernet wired devices, they are connecting via 2.4GHz and 5GHz but no Powerline backhaul presenting itself on the network map. There is also no way to enable/force Powerline as a backhaul option.
Looking at other threads where there is a similar issue, I've tried moving the units closer together on the same breaker, and even connecting via the same pair of sockets. I've tried connecting via ethernet temporarily. I've even tried moving them to the top of the house and down to the end of the garden. Nothing seems to enable Powerline backhaul. Any ideas what's going on?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I got the 3 pack yesterday and first it wouldn't use the powerline backhaul, but I updated the firmware which maybe fixed that.
But when using a Roku next to the main node, the Roku connected to the furthest node generating a wifi signal causing the Roku to drop.
Also while using a laptop in one area on one node, and moving to another area, the laptop stays connected to the original node even though I'm right next to the second node (which is also the main node).
So, it's not "seamless" which is why I got it. Another point, the internet is just not as fast while using this.
A tad frustrating.
- Copy Link
- Report Inappropriate Content
I have a new installation (2 days ago), it has a weak wifi connection between the main unit and the first satellite, then a fair wifi connection to the next satellite. Both are showing powerline as active. However it prioritises the wifi. It does not show an option to permanently select powerline only? I have 1.0.4 firmware and the latest app (updated today). What is meant to be showing in 1.0.4?
Thanks
David-TP wrote
@TheInfamousMrD @ommoti @Jeg5342 @Dracon @Birillo
Update:
Hi All,
Thank you very much for your time and patience.
The official firmware to fix this issue has been released already.
You can go to APP>>More>>System>>Update Deco to see whether you are able to detect the new 1.0.4 firmware.
Or you could manually install the official firmware here.
Deco PX50_V1_1.0.4_build_20230915
Thank you again for your cooperation and support.
Best regards.
- Copy Link
- Report Inappropriate Content
@firewater "Both are showing powerline as active. However it prioritises the wifi."
How do you know it prioritizes the wifi? Is there a way to tell or test?
- Copy Link
- Report Inappropriate Content
Hi, Welcome to the community.
I shared the same doubts as Alexmesh. I think you might tell from the internet speed.
Powerline Backhaul generally offers a superior link speed between Deco units compared to Wi-Fi Backhaul in most cases. However, since the Deco APP does not display the link speed status, it becomes challenging to directly determine which Backhaul is leading in performance.
Did you use any Powerline adapter before Deco PX50?
It would also help if you could test the Ethernet connection speed directly from the satellite Deco PX50.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @David-TP / TPLink Support & Everybody!
For many years I had been using the TL-PA7010 KIT and it worked very well. Now I decided to refresh my home network solution and got form AMAZON US this PX50 pack.
I found this thread in the support forum and the truth is that I feel totally identified with the reported problems. I am an advanced telecommunications user and I tried to diagnose the problem. My conclusions were that the PX50 does not know how to manage the traffic queues between both backhaul links, and taking Wifi as priority over PLC, making the performance between distant DECO to the main DECO node works at the lowest speed (maybe jitter issues). I was able to detect that the PX50 mesh performs very well in the first 60 seconds after restart, but after that minute it completely falls the speed.
I Also apply the Work Around (Hard Reset / Deco Topology Star&Chain) and Nothing Change…
The main unit is connected back2back to my home router and works perfectly, this issue happen in the last 2 units connected
My configuration environment
• Model:PX50(1.0)
• Firmware Version:1.2.1 Build 20230920 Rel. 62115
• Label below: US/1.6
• Operational Mode: Access Point.
Is possible in the next firmware release to have an option to disable backhaul WiFi to avoid this problem??, Also here In my neighborhood I have to many SSID and Wireless congestion, and the way that the Wireless Mesh works is not very convenient for the wireless device experience, to much wireless noise in the air.
Diego.
- Copy Link
- Report Inappropriate Content
Hi @David-TP
This solution to install Deco PX50_V1_1.0.4_build_20230915, also apply to my enviroment? or my actual firmware deployed include this fix?
My configuration environment
• Model:PX50(1.0)
• Firmware Version:1.2.1 Build 20230920 Rel. 62115
• Label below: US/1.6
• Operational Mode: Access Point.
Diego.
- Copy Link
- Report Inappropriate Content
@Jeg5342 exactly as you say.
- Copy Link
- Report Inappropriate Content
@Pulpo72 it does not solve the PCL ISSUE. Decos continue using wifi between them. No PCL as TP-LINK advertises.
- Copy Link
- Report Inappropriate Content
Mine still switches to wireless at times during the late evening, the PLC is susceptible to interference or there is a firmware bug.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 25315
Replies: 111
Voters 2
