Disable Firewall or enable bridge mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hey, is it possible to enable bridge mode or disable my firewall because my port forwards doesn't work, if so i can let my port forwards works the ports im trying to forward are 8080 and 25566, it will be appriciated if someone can help my my info is listed in this post i dont know the Hardware Version so i think V10 is not the right one so dont look at that!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Nice to see you again.
You could set Deco M4 into access point mode:
How to set up Deco to work in Access Point mode
After that, there is no need to open ports on Deco, only on the ISP router.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP so like on my ziggo router? thats a ISP Router right? and will access mode affect my speeds?
i hope not because my parents wont like slow internet
Greetings
Erwin
- Copy Link
- Report Inappropriate Content
Hi, turning Deco M4 into Access Point will not affect the internet speed.
The ISP router in your case, yes, is the Ziggo router.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP hello i forwarded it on my ISP Router but if i lookup (myip:5500) 5500 is a port for my website it says This page is not reachable
Error:
ERR_CONNECTION_TIMED_OUT
i forwarded it correctly idk why its not working
- Copy Link
- Report Inappropriate Content
Hi,
Is 192.168.178.30 the IP address of the Minecraft journey map?
The configuration seems all right.
Have you ever contacted Ziggo router support to see if the router needs other settings to open a port? or whether you got a public IP on the Ziggo router?
Best regards.
- Copy Link
- Report Inappropriate Content
@ErwinBirdy I'm having the exact same issue on my Deco M4 system. Everything was working up to a few weeks ago. I don't want to set my routers up in AP mode due to other limitations I had in the past. I also don't have access to configure my ISP's fibre router.
- Copy Link
- Report Inappropriate Content
@David-TP no i didnt do that yet!
- Copy Link
- Report Inappropriate Content
@David-TP thats my local ip of my laptop
- Copy Link
- Report Inappropriate Content
Thanks. Since you are already on the web interface of the Ziggo router, I think you might be able to find the Internet IP address on the Ziggo router.
You could compare it with your external IP address here: https://whatismyipaddress.com/
They need to be the same otherwise there is a firewall from ISP which blocks the remote connection to LAN clients.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 984
Replies: 9
Voters 0
No one has voted for it yet.