I can't get into router settings
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I can't get into router settings
Tags:
#I can't get into router settings
I have a problem with my router TL-WR841N. I can not enter the configuration through 192.168.0.1 nor 192. The dialog box to enter the username and password does not appear. It stays charging for a while and nothing I already reset it to the factory, apply all possible reset modes but nothing. Change the network cables, try different browsers (Chrome, Mozilla, Opera GX) from the PC also from the mobile but nothing loads. Connect in the 4 ports also in the WAN one. Also in the internet adapter put automatic ip and nothing. I also set a static ip but it still doesn't work. I need to go into my router's settings... Any solution?
Re:I can't get into router settings
To access your router administrative page you have to use only router's LAN ports or its Wi-Fi.
Here's how to determine router's LAN IP address, when connected successfully to your router (wired or wireless).
Observe your router LED status to determine its state:
If you still can't open the router administrative page:
Use the wps/reset button - with the router powered on, press and hold the wps/reset button (more than 5 seconds) until the sys LED becomes quick-flash from slow-flash. Then release the button and wait the router to reboot to its factory default settings.
After resetting the router's LAN IP address is 192.168.0.1. Try connecting this IP address again and if you still can't then probably it's time to buy a newer router.
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".