Can't connect from main LAN to devices connected wirelessly on wifi router using WDS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't connect from main LAN to devices connected wirelessly on wifi router using WDS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't connect from main LAN to devices connected wirelessly on wifi router using WDS
Can't connect from main LAN to devices connected wirelessly on wifi router using WDS
2023-01-27 20:14:07 - last edited 2023-02-01 09:34:50
Model: Archer AX21   Archer C9  
Hardware Version: V3
Firmware Version: 1.1.3 Build 20221125 rel.83530(5553)

I have an Archer AX1800 setup as my main router.  
I have an Archer C9 connecting to the AX1800 using WDS.  The devices connecting to the C9 can access the internet and connect to devices on the main LAN.  However, the reverse is not true.  Devices on the main LAN (connected to the AX1800) can't connect to the devices connected to the C9.
Is there something I need to disable on the C9?

 

  0      
  0      
#1
Options
1 Reply
Re:Can't connect from main LAN to devices connected wirelessly on wifi router using WDS
2023-02-01 09:39:32

@dwightus 

 

I would suggest checking the WDS configuration on the C9 by following this FAQ and ensuring all parameters are configured correctly, especially the DHCP server, which should be disabled.

 

You can manually give a static IP address for the C9, and make sure it is within the network range of the AX1800. For example, if the IP of the AX1800 is 192.168.0.1, manually assign IP 192.168.0.254 to the C9.

If my reply helps with the issue, please click on the arrow pointing upward. If it solves your issue, please click the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options