TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps
TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps
2023-01-20 16:36:12 - last edited 2023-01-21 16:00:49
Tags: #Speed
Model: TL-WA901N  
Hardware Version: V6
Firmware Version: 3.16.9 Build 191207 Rel.58435n (4555)

I have read several articles on here where people have not been able to achieve more than 100mbps on their 901 devices.  I have not read any where the person has then gone on to resolve the issue and achieve 450mbs or anywhere near that.  So is it possible to achieve those speeds on this device?

Living in rural France the speed of my internal network was never an issue because the connection from my ISP never exceeded 45mbps, BUT then along came Fibre and I am suddenly aware that my internal network is slow.

My network is an Orange Livebox 5 (Sagemcom Fibre Router)  with 5 x TP-WA901N and ND's and 1 x Outdoor Wifi Extender (outdoorrouter.com).  The 901's are all configured as WAP's and hardwired back to the Router.

I have performed several tests but in the end stripped back the network as and the results are:

  •  TP-WA901N V6 Factory Reset and latest firmware installed and configure as a WAP and then connected to a LAN port on the router with 2 meter long CAT5 fly lead gave a reading of 93.55Mbps (download) using Ookla speedtest.
  • Same Laptop connected to the same router port using the same cat 5 fly lead delivered a speed reading of 412.29 Mbps
  • Same Laptop connected to the Orange Liveboxs Wifi (5 GHz is enabled) provided a speed reading of 360.51 Mbps 

 

I have looked through all the settings on the 901 and tried changing the Channel Width from 20 to 40MHz which made no difference.  The Wireless settings state that the Max Tx Rate is 450Mbps but none of my 901's will exceed 100Mbps.    

 

Not that the network is slow for my use but I don't want the AP's to now limit my network now I have fibre.........is there a setting, or some small print about actual speeds that I am missing.

 

Hope someone out here can help speed up my internal network. 

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps-Solution
2023-01-21 09:22:16 - last edited 2023-01-21 16:00:49

  @MaisonMontruf 

 

Your problem comes from the fact that TL-WA901N(D)'s ethernet port is only 10/100 mbps capable, which makes a bottleneck for the traffic coming through - specs.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps-Solution
2023-01-21 09:22:16 - last edited 2023-01-21 16:00:49

  @MaisonMontruf 

 

Your problem comes from the fact that TL-WA901N(D)'s ethernet port is only 10/100 mbps capable, which makes a bottleneck for the traffic coming through - specs.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps
2023-01-21 16:03:07

  @MaisonMontruf Thank you so much for this.  I missed that!!!

So it does beg the question what use is the 450mbps wifi if it can only transmit out at 100mbps 

  0  
  0  
#3
Options
Re:TL-WA901N(D) how do you achieve 450mbps? I am stuck at 100mbps
2023-01-21 17:11:39

  @MaisonMontruf 

 

The use of these 450 mbps could be a communication between wireless client devices that are connected to the same WAP.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options