Official Release Deco XE200 New Firmware-1.1.1 Available
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello Everyone,
The official firmware-1.1.1 for Deco XE200 V1 is available now. It supports all the new features on the official 1.6.0 firmware of Deco M5.
Download link: Deco XE200_V1_1.1.1 Build 20230220
The 1.1.0 firmware version is a leap forward and any feedback after the firmware upgrade will be highly valued. If you have any confusion about the firmware upgrade or happen to experience some issues, please feel free to comment below.
More details about New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients' Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. Allowed to set the same network name (SSID) for 2.4GHz, 5GHz & 6GHz.
Notes:
1. This firmware downgrade could be done via firmware recovery (follow the http uboot method and use the 1Gpbs ports in step 2.b) - How to use firmware recovery.
2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
4. You may miss some new features when Deco is set to Access Point mode. Learn more about Deco's Access Point mode.
Related Articles:
All my XE200 now show offline (except for main) in both the app and webportal after installing this beta. They appear to be working as all LEDs are green, and even my X50-outdoor that is hardwired to one of the XE200 that is listed as offline is online and working.
npc, Hi, it is planned to release the same version for Deco XE75 and Deco XE75 pro but I could not guarantee when this firmware is finally implemented. Best regards.
@z28camaro2k2 Thank you very much. The APP log has been received
.
fitzruption, Hi, welcome to the community, and Thanks for the feedback.
Before downgrading the firmware, could you please help me submit the APP log as well?
the firmware downgrade needs to be via firmware recovery:
1. This firmware downgrade could be done via firmware recovery (follow the http uboot method and use the 1Gpbs ports in step 2.b) - How to use firmware recovery.
And the current official firmware is
https://static.tp-link.com/upload/firmware/2022/202210/20221008/Deco_XE200_V1_1.0.1_220810.zip
Thank you very much.
Best regards.
