Configuring RE305 with an ethernet backhaul cable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Configuring RE305 with an ethernet backhaul cable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configuring RE305 with an ethernet backhaul cable
Configuring RE305 with an ethernet backhaul cable
2023-01-10 18:54:56 - last edited 2023-12-14 01:27:00
Tags: #ethernet cable backhaul
Model: RE305  
Hardware Version:
Firmware Version:

I have used an RE305 extender without any problems for a few years. Originally, I used WPS to connect it to my provider's router.  However, I would like to install it now with an ethernet cable backhaul, connected to the same router.  I could not find whether it can be done with this extender, an if so, how to do it.  Any pointers will be appreciated.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Configuring RE305 with an ethernet backhaul cable-Solution
2023-01-12 11:15:48 - last edited 2023-12-14 01:27:00

  @tszk 

Hi, it is suggested to have a look at this link:

https://www.tp-link.com/en/support/faq/1401/

Best regards.

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Configuring RE305 with an ethernet backhaul cable-Solution
2023-01-12 11:15:48 - last edited 2023-12-14 01:27:00

  @tszk 

Hi, it is suggested to have a look at this link:

https://www.tp-link.com/en/support/faq/1401/

Best regards.

Recommended Solution
  0  
  0  
#2
Options
Re:Configuring RE305 with an ethernet backhaul cable
2023-01-15 18:39:51

  @tszk 

 

I ended up configuring it with WPS, and then connected it with the ethernet cable to my provider's modem.  It worked! 

 

Thanks, anyway.

 

Best

  0  
  0  
#3
Options