Official Release Deco X50/X55 V1/V1.2/V2 with VPN/Static Route/MTU
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello Everyone,
We are excited to announce the official firmware version 1.2.x for Deco X50/Deco X55 V1/V1.2/V2 has been released recently. With this new firmware, you can now configure the VPN server/client, and other advanced features on the Deco.
Deco X50_V1/V1.2/V2
Deco X55_V1/V1.2/V2
>>How to update the firmware via web UI
Release Note:
New features:
1. Support for VPN server features, including Open VPN, PPTP VPN and L2TP/IPsec VPN.
2. Support for VPN client features, including Open VPN, PPTP VPN and L2TP/IPsec VPN.
3. Support for Static Route under Deco APP>More>Advanced.
4. Added the ability to customize the MTU size under Deco APP>More>Internet Connection>Internet Connection Type.
5. Added IOT network function.
* The following features(6-12) are also supported on 1.1.0 version:
6. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
7. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
8. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
9. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
10. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
11. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
12. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
Improvements:
1. Optimized the MAC Clone function.
2. Improved system reliability and security.
Note:
1. The Advanced features need to be configured on the Deco APP and please make sure your Deco APP is up to date.
2. Some new features would not be available when the router is working in Access Point mode.
3. The firmware downgrade needs to be performed by firmware recovery. >>How to use firmware recovery on Deco
Please feel free to comment below if there is any question about the new firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I have tried various settings but cannot get VPN client on X50 to work (using ExpressVPN).
if you get any feedback r.e. X60 let me know.
thanks,
Mark
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Mbauer5 Will do! At the moment these features are not available on X60 but I got privatevpn account to test with if they land on X60.
- Copy Link
- Report Inappropriate Content
Still 0Kbps on the front page for bandwidth
Still no Test Internet Speed
Running in AP mode
- Copy Link
- Report Inappropriate Content
Hi,
I have the x50 3 unit system on what appears to be 1.0.1 but have no option to update to this latest build via the deco app, please can you advise? 
- Copy Link
- Report Inappropriate Content
Hi, so far, there hasn't been a plan to support MAC filtering on Deco X50 yet.
Personally, I don't think Deco X50 will support "Test Internet speed" later on in the new firmware.
As for the bandwidth issue in AP mode, a new Deco APP version 3.3.x will be released very soon and it will help with this issue.
nobiscuits Welcome to the community.
I think you might have Deco X50 V1.2 that does not share the same firmware as V1. It will still need a while before V1.2 get the 1.2.0 firmware.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Can I ask you something, if I have the following deco network scheme - 1 Deco x50-dsl for the main unit and two other deco x50 (with the latest firmware) as extras, will the VPN option provided by the deco X50 appeared in the mobile app I'm configuring and using?
- Copy Link
- Report Inappropriate Content
Hi, your question might be the same as this link:
The VPN feature follows the main Deco so the main Deco needs to support this feature first. Deco X50-DSL does not yet.
https://community.tp-link.com/us/home/forum/topic/601960
Best regards.
- Copy Link
- Report Inappropriate Content
Hi David, how i can verify my hardware version because in my application doesn't detect new version
I have x50
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback.
It is printed on the bottom of Deco X50.
How to find the hardware version on a TP-Link device
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 35579
Replies: 175
Voters 5
