Hi,

We recently bought Archer AX72 and we want to get in to Debug/CLI console either in RS232 or Telnet.

When we opened the top cover, we are able to see two 4-pin headers (JP1, JP2) on the board without pins are soldered. But we have soldered the 4-pin headers and we are not seeing any serial logs on both the pin headers.

Could you share us the pin details of the Serial port on the board for debug logs as well as to access CLI prompt?

Also, could you share us the detail to enable Telnet on this router?

We are using this router in our automated setup where we want to take control on the channel configuration from CLI commands.

Regards,

Senthilkumar K