M4R TP-Link problem in AP mode with DHCP server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

M4R TP-Link problem in AP mode with DHCP server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
M4R TP-Link problem in AP mode with DHCP server
M4R TP-Link problem in AP mode with DHCP server
2022-12-10 07:58:56

Hi, I saw old thread about DHCP server. Has it been solved?

 

I am using NAS with DDNS for external access.

 

The main router from ISP is acting as DHCP server and can point to right NAS IP.  However, the M4R is connected directly through LAN from main router and is set as AP mode; cannot access DDNS. In theory, if the M4R  is AP, then it should not have problem with this...

  0      
  0      
#1
Options
1 Reply
Re:M4R TP-Link problem in AP mode with DHCP server
2022-12-14 10:59:15

  @KRPX 

Hi, you could check the current operation mode under Deco APP>More>Advanced>Operation mode, and make sure it is under AP mode.

I don't think your current issue is related to the DHCP server on AP mode.

Would the device connected to Deco still have internet service? And please also refer to this link and check what is the current network gateway:

By the way, are you still able to access the NAS via DDNS when the clients are connected to ISP's main router?

Wait for your reply.

Best regards.

  0  
  0  
#2
Options