Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Mesh router with a D-Link smart switch

< Deco

Mesh router with a D-Link smart switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mesh router with a D-Link smart switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CharlesM99

2022-11-23 22:37:32 - last edited 2024-10-16 08:38:49

Posts: 19

Helpful: 6

Solutions: 0

Stories: 0

Registered: 2022-11-23

Mesh router with a D-Link smart switch

2022-11-23 22:37:32 - last edited 2024-10-16 08:38:49

Tags: #Presales

Model: Deco X20

Hardware Version:

Firmware Version:

Hi, I'm not very familiar with setting a wireless network like this up, so I figured I'd ask the pros.

I live in a big shared flat, with fairly thick concrete walls. And several of us are having issues with the wifi, so I'm hoping to improve things.

I'll start with describing our current setup. We have a modem with one Ethernet cable feeding straight to a router, and another Ethernet cable feeds a D link Web Smart Switch.

The web smart switch has Ethernet cables wired into various rooms. And there is a second router that is fed from the Web Smart Switch.

I was hoping to replace our current two routers with several Deco X20's.

Would it be possible to wire one main Deco X20 to the modem, and from that main X20 wire into the Web Smart switch?

And then we can wire in an X20 into any room that is having wifi issues?

Or should the main router be something more powerful, that will be able to relay the signal through the Web Smart Switch into the various other X20 routers?

I hope I'm making sense! I'd appreciate any help or insight

5 Reply

David-TP

2022-11-24 06:36:55

Posts: 12776

Helpful: 1790

Solutions: 1294

Stories: 9

Registered: 2020-04-14

Re:Mesh router with a D-Link smart switch

2022-11-24 06:36:55

@CharlesM99

Hi, the following network map would work fine:

Internet service---ISP modem---main router----main Deco X20---A network switch---Satellite X20 #2

\----Satellite X20 #3

\----Satellite X20 #4

The main concern for me is the D-Link smart switch you have mentioned. Can I have the model number of the switch?

The Deco Ethernet backhaul feature is based on the standard IEEE 1905.1 protocol. However, we find that some switches, mainly the D-Link switches, will not forward packets based on IEEE 1905.1 protocol, causing all Deco units in a network loop and become quite unstable.

For more details, you might have a look at this link:General questions about Ethernet Backhaul feature on your Deco

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

CharlesM99

LV1

2022-11-24 07:10:15

Posts: 19

Helpful: 6

Solutions: 0

Stories: 0

Registered: 2022-11-23

Re:Mesh router with a D-Link smart switch

2022-11-24 07:10:15

@David-TP

Thanks for the reply.

The switch is a D-Link Web Smart Switch DGS-1210-24.

Do you know if that model is IEEE 1905.1 compatible?

Thank you

CharlesM99

LV1

2022-11-24 07:55:57

Posts: 19

Helpful: 6

Solutions: 0

Stories: 0

Registered: 2022-11-23

Re:Mesh router with a D-Link smart switch

2022-11-24 07:55:57

Also I noticed you have a "main router" between the modem and the main deco unit. Is that necessary? I'd rather just have all Deco routers and not have to deal with any other routers?